#9974: The current (rather old) version of GnuTLS fails to install on AIX 5.3
----------------------------------+-----------------------------------------
Reporter: drkirkby | Owner: drkirkby
Type: defect | Status: new
Priority: minor | Milestone: sage-wishlist
Component: AIX or HP-UX ports | Keywords:
Author: | Upstream: N/A
Reviewer: | Merged:
Work_issues: |
----------------------------------+-----------------------------------------
I've CC'ed Alan at IBM, so he can see I am actually looking at an AIX port
of Sage, though access to faster hardware would be useful for this. Also I
thought Minh might be interested, as like myself he signed up for a free
AIX account at [http://www.metamodul.com/ Metamodul] though I personally
found the software was not installed optimally.
Using my own rather old server.
* IBM
[http://publib.boulder.ibm.com/infocenter/pseries/v5r3/index.jsp?topic=/com.ibm.pseries.doc/hardware_docs/rs6000_7025f50series.htm
RS/6000 7025 F50]
* 4 x 332 MHz 32-bit PowerPC CPUs
* 3 GB RAM
* A fair wide mixture of disks sizes (3 x 9 GB, 1 x 18 GB, 2 x 36 GB and
1 x 73 GB)
* AIX 5.3 (A POSIX certified operating system)
* gcc 4.2.4 downloaded from [http://pware.hvcc.edu/ pware]
* DDS-4 tape drive
I found [http://www.gnu.org/software/gnutls/ GnuTLS] would not install.
The reason for the failure is not obvious, but I can't be bothered to look
into this in any depth, as the version of GnuTLS in Sage is very old. A
ticket will be created to update GnuTLS.
Since
* IBM have expressed an interest in an AIX port of Sage and may be
willing to donate hardware or provide remote access.
* Porting software to other platforms often discovers errors
getting GnuTLS to work on AIX is worthwhile.
I've marked it as a low priority, as an AIX port is not currently being
seriously worked on, but that might change, especially once the 64-bit
Solaris ports are complete. I've actually spent the US equivalent of a few
hundred dollars in fixing my own RS/6000 (PSU had below up), adding RAM.
changing the non-functional DDS-3 tape drive for a DDS-4 tape drive and
adding disk space,
Note, AIX 5.3 is not the latest release (6.1 is), but AIX 6.1 will not run
on 32-bit hardware. AIX 5.3 is the previous version of AIX, since there
was no version 5.4 or 6.0. (IBM's version numbers seem even stranger than
those used by Sage, which are themselves very strange.)
{{{
gcc -std=gnu99 -g -O2 -D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-pointer-sign -o ex-serv-anon ex-serv-anon.o -L
/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/lib/.libs
./.libs/libexamples.a ../../gl/.libs/libgnu.a
-L/home/users/drkirkby/sage-4.6.alpha1/local/lib -L/opt/pware/lib
-L../../lib/.libs -L../../libextra/.libs -lgnutls-extra -lopencdk -lgnutls
-lz -lgcrypt -lgpg-error -lintl -liconv -lpthread -lc
-Wl,-blibpath:/home/users/drkirkby/sage-4.6.alpha1/spkg/buil
d/gnutls-2.2.1.p5/src/lib/.libs:/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/libextra/.libs:/home/users/drkirkby/sage-4.6.alpha1/local/lib:/opt/pware/lib:/home/users/d
rkirkby/sage-4.6.alpha1/local/lib:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4/../../..:/usr/lib:/lib
/bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2
-D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-po
inter-sign -no-install -o ex-client-tlsia ex-client-tlsia.o
libexamples.la ../../gl/libgnu.la ../../lib/libgnutls.la ../../libextra
/libgnutls-extra.la
/bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2
-D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-po
inter-sign -no-install -o ex-serv-pgp ex-serv-pgp.o libexamples.la
../../gl/libgnu.la ../../lib/libgnutls.la ../../libextra/libgnutls-
extra.la
/bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2
-D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-po
inter-sign -no-install -o ex-client-srp ex-client-srp.o libexamples.la
../../gl/libgnu.la ../../lib/libgnutls.la ../../libextra/libgnutls-
extra.la
/bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2
-D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-po
inter-sign -no-install -o ex-serv-srp ex-serv-srp.o libexamples.la
../../gl/libgnu.la ../../lib/libgnutls.la ../../libextra/libgnutls-
extra.la
gcc -std=gnu99 -g -O2 -D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-pointer-sign -o ex-serv-pgp ex-serv-pgp.o -L/h
ome/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/lib/.libs
./.libs/libexamples.a ../../gl/.libs/libgnu.a
-L/home/users/drkirkby/sage-4.6.alpha1/local/lib -L/opt/pware/lib -L
../../lib/.libs -L../../libextra/.libs -lgnutls-extra -lopencdk -lgnutls
-lz -lgcrypt -lgpg-error -lintl -liconv -lpthread -lc
-Wl,-blibpath:/home/users/drkirkby/sage-4.6.alpha1/spkg/build/
gnutls-2.2.1.p5/src/lib/.libs:/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/libextra/.libs:/home/users/drkirkby/sage-4.6.alpha1/local/lib:/opt/pware/lib:/home/users/drk
irkby/sage-4.6.alpha1/local/lib:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4/../../..:/usr/lib:/lib
gcc -std=gnu99 -g -O2 -D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-pointer-sign -o ex-client-tlsia ex-client-tlsia
.o
-L/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/lib/.libs
./.libs/libexamples.a ../../gl/.libs/libgnu.a
-L/home/users/drkirkby/sage-4.6.alpha1/local/lib -L/opt/pwar
e/lib -L../../lib/.libs -L../../libextra/.libs -lgnutls-extra -lopencdk
-lgnutls -lz -lgcrypt -lgpg-error -lintl -liconv -lpthread -lc
-Wl,-blibpath:/home/users/drkirkby/sage-4.6.alpha1/spk
g/build/gnutls-2.2.1.p5/src/lib/.libs:/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/libextra/.libs:/home/users/drkirkby/sage-4.6.alpha1/local/lib:/opt/pware/lib:/home/u
sers/drkirkby/sage-4.6.alpha1/local/lib:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4/../../..:/usr/lib:/lib
gcc -std=gnu99 -g -O2 -D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-pointer-sign -o ex-serv-srp ex-serv-srp.o -L/h
ome/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/lib/.libs
./.libs/libexamples.a ../../gl/.libs/libgnu.a
-L/home/users/drkirkby/sage-4.6.alpha1/local/lib -L/opt/pware/lib -L
../../lib/.libs -L../../libextra/.libs -lgnutls-extra -lopencdk -lgnutls
-lz -lgcrypt -lgpg-error -lintl -liconv -lpthread -lc
-Wl,-blibpath:/home/users/drkirkby/sage-4.6.alpha1/spkg/build/
gnutls-2.2.1.p5/src/lib/.libs:/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/libextra/.libs:/home/users/drkirkby/sage-4.6.alpha1/local/lib:/opt/pware/lib:/home/users/drk
irkby/sage-4.6.alpha1/local/lib:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4/../../..:/usr/lib:/lib
gcc -std=gnu99 -g -O2 -D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-pointer-sign -o ex-client-srp ex-client-srp.o
-L/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/lib/.libs
./.libs/libexamples.a ../../gl/.libs/libgnu.a
-L/home/users/drkirkby/sage-4.6.alpha1/local/lib -L/opt/pware/li
b -L../../lib/.libs -L../../libextra/.libs -lgnutls-extra -lopencdk
-lgnutls -lz -lgcrypt -lgpg-error -lintl -liconv -lpthread -lc
-Wl,-blibpath:/home/users/drkirkby/sage-4.6.alpha1/spkg/bu
ild/gnutls-2.2.1.p5/src/lib/.libs:/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/libextra/.libs:/home/users/drkirkby/sage-4.6.alpha1/local/lib:/opt/pware/lib:/home/users
/drkirkby/sage-4.6.alpha1/local/lib:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4:/opt/pware/lib/gcc/powerpc-ibm-
aix5.3.0.0/4.2.4/../../..:/usr/lib:/lib
make[6]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/examples'
Making all in scripts
make[6]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/scripts'
make[6]: warning: -jN forced in submake: disabling jobserver mode.
make[6]: Nothing to be done for `all'.
make[6]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/scripts'
Making all in manpages
make[6]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/manpages'
make[6]: warning: -jN forced in submake: disabling jobserver mode.
make[6]: Nothing to be done for `all'.
make[6]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/manpages'
Making all in credentials
make[6]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials'
make[6]: warning: -jN forced in submake: disabling jobserver mode.
Making all in openpgp
make[7]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials/openpgp'
make[7]: warning: -jN forced in submake: disabling jobserver mode.
make[7]: Nothing to be done for `all'.
make[7]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials/openpgp'
Making all in srp
make[7]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials/srp'
make[7]: warning: -jN forced in submake: disabling jobserver mode.
make[7]: Nothing to be done for `all'.
make[7]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials/srp'
Making all in x509
make[7]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials/x509'
make[7]: warning: -jN forced in submake: disabling jobserver mode.
make[7]: Nothing to be done for `all'.
make[7]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials/x509'
make[7]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials'
make[7]: warning: -jN forced in submake: disabling jobserver mode.
make[7]: Nothing to be done for `all-am'.
make[7]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials'
make[6]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc/credentials'
make[6]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc'
make[6]: warning: -jN forced in submake: disabling jobserver mode.
make[6]: Nothing to be done for `all-am'.
make[6]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc'
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc'
make[4]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/doc'
Making all in tests
make[4]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests'
make[4]: warning: -jN forced in submake: disabling jobserver mode.
Making all in rsa-md5-collision
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests
/rsa-md5-collision'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests
/rsa-md5-collision'
Making all in pkcs1-padding
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/pkcs1-padding'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/pkcs1-padding'
Making all in pkcs8-decode
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/pkcs8-decode'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/pkcs8-decode'
Making all in pkcs12-decode
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/pkcs12-decode'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/pkcs12-decode'
Making all in userid
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/userid'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/userid'
Making all in pathlen
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/pathlen'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/pathlen'
Making all in key-id
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests
/key-id'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests
/key-id'
Making all in sha2
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/sha2'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/sha2'
Making all in hostname-check
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests
/hostname-check'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests
/hostname-check'
Making all in openpgp
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/openpgp'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests/openpgp'
make[5]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests'
make[5]: warning: -jN forced in submake: disabling jobserver mode.
/bin/sh ../libtool --tag=CC --mode=compile gcc -std=gnu99
-DHAVE_CONFIG_H -I. -I.. -I../lgl -I../lgl -I../gl -I../gl -I../includes
-I../includes -I../doc/examples -I/home/users/drkirkby/s
age-4.6.alpha1/local/include -I/opt/pware/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2
-D_REENTRANT -D_THREAD_SAFE -Wno-pointer-sign
-MT utils.lo -MD -MP -MF .deps/utils.Tpo -c -o utils.lo utils.c
mkdir .libs
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -I../lgl -I../lgl -I../gl -I../gl
-I../includes -I../includes -I../doc/examples
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -I/opt/pware/inc
lude -g -O2 -D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-pointer-sign -MT utils.lo -MD -MP -MF .deps/utils.Tpo
-c
utils.c -DPIC -o .libs/utils.o
mv -f .deps/utils.Tpo .deps/utils.Plo
/bin/sh ../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2
-D_REENTRANT -D_THREAD_SAFE
-I/home/users/drkirkby/sage-4.6.alpha1/local/include -g -O2 -D_REENTRANT
-D_THREAD_SAFE -Wno-point
er-sign -no-install -o libutils.la utils.lo
ar cru .libs/libutils.a .libs/utils.o
ranlib .libs/libutils.a
creating libutils.la
(cd .libs && rm -f libutils.la && ln -s ../libutils.la libutils.la)
make[5]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests'
make[4]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/tests'
Making all in po
make[4]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/po'
make[4]: warning: -jN forced in submake: disabling jobserver mode.
make[4]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src/po'
make[4]: Entering directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src'
make[4]: warning: -jN forced in submake: disabling jobserver mode.
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src'
make[2]: *** [all] Error 2
make[2]: Leaving directory
`/home/users/drkirkby/sage-4.6.alpha1/spkg/build/gnutls-2.2.1.p5/src'
failed to build GNUTLS
real 21m9.822s
user 14m6.587s
sys 3m56.694s
sage: An error occurred while installing gnutls-2.2.1.p5
}}}
--
Ticket URL: <http://trac.sagemath.org/sage_trac/ticket/9974>
Sage <http://www.sagemath.org>
Sage: Creating a Viable Open Source Alternative to Magma, Maple, Mathematica,
and MATLAB
--
You received this message because you are subscribed to the Google Groups
"sage-trac" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/sage-trac?hl=en.
