I observed this same behavior when Scott and i embeded the drawing tool in the PAS Authoring tool today.
-Tony On Mar 4, 2008, at 4:13 PM, "Geoffrey Kwan" <[EMAIL PROTECTED]> wrote: > I have been witnessing OT Drawing not saving when it is placed in > our VLE. Here is what I've figured out. > > The first element you draw will not be saved. Here is how to > reproduce the error. > > 1. Choose the circle tool > 2. Draw 3 circles > 3. Click "Save" > 4. It will say "Your data has been saved", then click "OK" > 5. Click the Show All Work button > 6. The screenshot of the step will only show the 2nd and 3rd circles > you drew > 7. Click back on the drawing step, you will only see the 2nd and 3rd > circles you drew here as well > > Previously I experienced the drawing step not saving at all because > I was using the pencil tool to draw a happy face. The drawing tool > treats all pencil strokes as one combined element so everything that > I drew with the pencil was considered the first element, and nothing > would be saved. > > > After performing the steps 1-7 above, there is another minor issue. > > 8. Draw something additional, such as 1 square > 9. Then click on Show All Work and the square will not be shown > 10. If you click back to the drawing step, the square will be visible > 11. Then if you click back on the Show All Work button again, your > square will finally be visible > > > Does anyone know what could be the cause of this issue? > > > Thanks, > Geoff > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SAIL-Dev" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/SAIL-Dev?hl=en -~----------~----~----~----~------~----~------~--~---
