I am trying that and still no success I have the check to Alarm when the value = to 0 but the other utilities are getting 0 so it seems to me that it should send an email but it doesn't.
If I try to change the check to 'is <> ' 0 it gets flagged down? It seems to me as if SALIVE is not getting a value when it performs the GET Any ideas. Thanks > -----Original Message----- > From: Kevin Stone [mailto:[EMAIL PROTECTED]] > Sent: Thursday, July 25, 2002 3:07 PM > To: [EMAIL PROTECTED] > Subject: RE: [SA-list] SNMP Checks > > > Try removing the leading "." from the OID. > > -Kevin > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] On Behalf Of Jack Lyons > > Sent: Thursday, July 25, 2002 2:55 PM > > To: '[EMAIL PROTECTED]' > > Subject: [SA-list] SNMP Checks > > > > > > I am trying to perform an SNMP check and it doesn't seem to > > be working. I can get the correct value from two other snmp > > utilities on the same machine. > > > > I tried turning up the logging to Maximum: > > Thursday, July 25, 2002 2:25:36 PM SNMPGet > > .1.3.6.1.4.1.476.1.2.1.1.1.6.1 on 10.1.10.16 Thursday, July > > 25, 2002 2:25:41 PM Sending email message (SiteNet > Integrator is DOWN) > > To unsubscribe from a list, send a mail message to > [EMAIL PROTECTED] > With the following in the body of the message: > unsubscribe SAlive > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
