RE: [SA-list] Logging on Status Change

[Dirk Bulinckx]

Title: RE: [SA-list] Logging on Status Change

aha then it's normal.

If you edit the entry it won't detect the status change correctly.

If you test it, test it with a service that you stop/start and this without editing the entry.

 

dirk.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Chong Wei Yu
Sent: Thu Jun 26 9:58 AM
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] Logging on Status Change

I tested with only one entry and tried with changing the monitored parameters (like C > 500GB, C < 500MB etc).

-----Original Message-----
From: Dirk Bulinckx [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 26, 2003 3:51 PM
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] Logging on Status Change

and did you enable the syslog for the individual entries?
 

dirk.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Chong Wei Yu
Sent: Thu Jun 26 9:47 AM
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] Logging on Status Change

Yes. It can receive all the test messages.

-----Original Message-----
From: Dirk Bulinckx [ mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ]
Sent: Thursday, June 26, 2003 3:41 PM
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] Logging on Status Change

IF you test it via the setup, does it arrive in the syslog server?
 

dirk.

-----Original Message-----
From: [EMAIL PROTECTED] [ mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> ]On Behalf
Of Chong Wei Yu
Sent: Thu Jun 26 8:12 AM
To: [EMAIL PROTECTED]
Subject: [SA-list] Logging on Status Change

Hi,

I have a requirement and I know SA can do it but just could not get it to
work.

I would like to the events to be logged when there is a status change.

There is an option in SA that is called Syslog, in the logging option. I
have installed the Kiwi Syslog. In SA, I have configured that in SA that if
detected any up, down, maintenance and unavailable event, all of these
should be log. However, after trying numerous times, it does not manage to
log anything from the followng status change,

Status from Down to Up
Status is Unavailable

In SA, I have set the Syslog option to

Down - Emergency
Up - Info
Maintenance - Notice
Unavailable - Emergency

When to send - Status Change

Options - Include RFC header

In short, it cannot log some of the status change.

Any idea?

Best Regards,

Wei Yu

****************IMPORTANT--PLEASE READ*******************
This electronic message, including its attachments, is COMPANY CONFIDENTIAL
and may contain PROPRIETARY or LEGALLY PRIVILEGED information. If you are
not the intended recipient, you are hereby notified that any use,
disclosure,copying, or distribution of this message or any of the
information included in it is unauthorized and strictly prohibited. If you
have received this message in error, please immediately notify the sender by

reply e-mail and permanently delete this message and its attachments, along
with any copies thereof. Thank you

****************IMPORTANT--PLEASE READ*******************
This electronic message, including its attachments, is COMPANY CONFIDENTIAL
and may contain PROPRIETARY or LEGALLY PRIVILEGED information. If you are
not the intended recipient, you are hereby notified that any use,
disclosure,copying, or distribution of this message or any of the
information included in it is unauthorized and strictly prohibited. If you
have received this message in error, please immediately notify the sender by
reply e-mail and permanently delete this message and its attachments, along
with any copies thereof. Thank you