RE: [SA-list] Trying to do an NT process check

[Riley, Stephen]

Title: Message

Eureka. I ran EXCTRLST.EXE from the resource kit. The performance counter for perfproc was disabled. I enabled it and voila. Sorry to waste so much bandwidth.   Thanks for the support. Steve -----Original Message----- From: Rosiak, John [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 27, 2003 12:33 PM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Trying to do an NT process check Stephen,   Double check to make sure that you are authenticating so that you can see all the processes on the machine.I check PCAnywhere as a service and a process on various machines. Also, make sure that the win2k machine is enabled for netbios over tcp in the network properties .   John -----Original Message----- From: Riley, Stephen [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 27, 2003 10:40 AM To: '[EMAIL PROTECTED]' Subject: RE: [SA-list] Trying to do an NT process check I tried that, searching for the pcAnywhere process and it fails immediately, the timeout doesn't come in to play.  I tried both awhost32 and awhost32.exe The log says:     Wednesday, August 27, 2003 10:35:06 AM ERR process check: ERR: -1 Wednesday, August 27, 2003 10:35:06 AM NT Process check of awhost32.exe on DVFSAPP4 failed     Wednesday, August 27, 2003 10:37:22 AM ERR process check: ERR: -1 Wednesday, August 27, 2003 10:37:22 AM NT Process check of awhost32 on DVFSAPP4 failed     -----Original Message----- From: Dirk Bulinckx [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 27, 2003 9:49 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Trying to do an NT process check Could you (for the test) enter manualy the name of a running process, then run one cycle, BUT set a high timeout (something like 25). What does that give?   dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Riley, Stephen Sent: Tue Aug 26 9:53 PM To: '[EMAIL PROTECTED]' Subject: RE: [SA-list] Trying to do an NT process check I'm sorry, I should have stated, I tried both name and IP address, and get the same error message. I tried on the same subnet, and on a different subnet too. Steve -----Original Message----- From: Dirk Bulinckx [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 26, 2003 11:34 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Trying to do an NT process check Try to use the IP address instead of the name.   dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Riley, Stephen Sent: Tue Aug 26 5:01 PM To: '[EMAIL PROTECTED]' Subject: [SA-list] Trying to do an NT process check I have tried this using version 4.0.1376 running on Windows NT 4.0 SP6a Server and also running version 4.0.1490 running on Windows 2000 Professional SP4.   If I try to add a check for an NT process it works fine if I select an NT 4.0 machine, but if I chose a Windows 2000 machine, I tried Professional, Server and Advanced Server and all did the same.     I get the error box: Error getting the process information from PCnnnn ERR: 01 ()       There is nothing in the SA log as I have not gotten as far as adding the check. Does anybody have any suggestions? Steve

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the 
sole use of the intended recipient(s) and may contain confidential and privileged 
information.  Any unauthorized review, use, disclosure or distribution is prohibited.  
If you are not the intended recipient, please contact the sender by reply e-mail and 
destroy all copies of the original message.