RE: [SA-list] Creating UDP Protocol for SIP

[Dirk Bulinckx]

Can you send me (off-list) the ethereal trace?   Dirk.   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Wasik Sent: Monday, December 29, 2003 4:29 PM To: [EMAIL PROTECTED] Subject: [SA-list] Creating UDP Protocol for SIP Hi all,   I have used SA to create a custom UDP protocol check for SIP (An IP telephony protocol). I am able to send the packet to the SIP device to be monitored and that device responds as expected. The UDP protocol check I created is set to expect the reply on UDP port 5060 and that is where the monitored device is replying to. (I'm using Ethereal to monitor this.)   However SA does not seem to be listening for the reply or at least not on that port. I used "netstat -an" on Windows XP to check this.   Any suggestions?   Thanks,   Paul         IF the SIP protocol is "simple" enough it should be possible with the protocol builder of Servers Alive.  We never tried it however with the SIP protocol; Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 24, 2003 12:41 AM To: [EMAIL PROTECTED] Subject: Servers Alive Feedback Woodstone Importance: High Type: Suggestion Subject:Servers Alive Feedback Woodstone, Servers Alive Freeware Other: Comments: Hi, I'm evaluating Servers Alive for possible commercial use with a SIP provider network. I love Kiwi tools and they recommend servers alive. I've been trying to create a UDP tool to send SIP OPTIONs requests to SIP telephony server. I need to monitor the service state of the SIP protocol on UDP port 5060. Do you know if anyone has been able to do this? Contact Name: Paul Wasik Contact email: [EMAIL PROTECTED] ContactRequested :ContactRequested User Agent : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; Hotbar 4.2.8.0; .NET CLR 1.0.3705) Remote IP  : 24.45.238.91