Sorry, no spaces. My page name setting that did NOT work was
Z:\ss\ServerStatus.htm
I tried htm and html, upper and lower case. Btw Z drive over the network.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Richard Temple
Sent: 09 January 2004 13:41
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] setup output html upload help required
Could the be a problem referencing a directory with spaces in it ?
I have always tended to use the c:\progra~1 rather than c:\program file
- can't remember whether I did this because I saw a problem.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of gene Martinez
Sent: 09 January 2004 13:31
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] setup output html upload help required
No, you can have it point to any directory you want..
At 01:02 PM 1/9/04 -0000, you wrote:
>Gene
>
>Got it working now. My current feeling is that Page name must ONLY be
>an entry name -not a "dir\filname" combination.
>
>Andy
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>Behalf Of gene Martinez
>Sent: 09 January 2004 12:55
>To: [EMAIL PROTECTED]
>Subject: RE: [SA-list] setup output html upload help required
>
>
>At 08:24 AM 1/9/04 -0000, you wrote:
>>Gene,
>>
>>Thanks for coming back. I have tried VERY hard to set up
>>setup/output/html page/default page properly. I have succeeded in
>>publishing to a local directory quite satisfactorily. But FTP'ing is
something else.
>>
>>I think my problem is to do with "page name" and/or "remote name" -
>>what they supposed to MEAN, and what are typical values.
>>
>>a) Page name
>
>Page name is the name and location that the file is created to on the
>local drive. ie:
>c:\salive\salive.html
>Also make sure that (Publish this webpage) is checked
>
>When ftping the page name is the file (html) that you want to ftp. You
>can have more than (1) htlm page generated by salive and this lets you
>select which (1) you want to work on and what you would like to do
with it. ie:
>ftp
>
>>I have worked out that this MUST resolve to a local file such as
>>"c:\abc.html" (the edit box has a "..." button next to it which helps
>>encourage this interpretation). And indeed anything that is not a
valid
>>filename such as "fred" generates errors. When FTP'ing what is the
>>usage
>of
>>Pagename? What does it mean to have an entry here? Surely template
>>or header/footer are parsed to create the entire final server status
page.
>>Also this file MUST exist.
>>
>>b) Remote name
>
>Remote name is the name you want to give to the file that you have
>ftp'ed, You may call it output.html on the local computer but need (or
>want) to call it mylist.html on the server your sending it to.
>Also you have it listed wrong below you have it as "\docs\popg\ss.html"
>this is not correct
>it should be docs/popg/ss.html no double quots and froward slash
>
>>This entry is at least badly documented. I initially thought was just
>>some random name so I left it blank. Later I worked out it might mean
>>the directory where the server status file was to be stored so I put
>>in "/docs/popg". Errors in the log showed that to be wrong. Finally
>>putting in "\docs\popg\ss.html", i.e. a directory and filename works -
>>in that the error looks different.
>>
>>I have tried every permutation and combination in these boxes
>>imaginable - no success. I have read and re-read all the
>>documentation, I have read the FAQ and searched the archives. And I
am quite stuck right now.
>>
>>My current values for these fields are
>> page name = Z:\ss\ss.htm
>> remote name = \docs\ss.htm <- change to docs/ss.html
>but in looking above it should be docs/popg/ss.html
>
>Let me know if this gets you going in the right direction
>
>>
>>Andy
>>PopG
>>
>>
>>
>>-----Original Message-----
>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>>Behalf Of gene Martinez
>>Sent: 09 January 2004 02:01
>>To: [EMAIL PROTECTED]
>>Subject: Re: [SA-list] setup output html upload help required
>>
>>
>>Got to setup/output/html page/defaultpage (it that is what you have
>defined)
>>check - publish this web page
>>page name - should have the directory and pagename.html upload via -
>>ftp ftp server - name remote file name - what do you wish to call file
>>user name password
>>
>>it works I'm sending (1) to the web everytime it runs...
>>
>>
>>At 01:30 AM 1/9/04 -0000, you wrote:
>>>Ok I am a new user with a fresh download trying to monitor four
servers.
>>>Nothing I can do enables me to upload output to my web server. I am
>>>used
>>to
>>>posting files to the server - but salive generates the log file
>>>
>>>09 January 2004 01:25:14 Web page generation Default page
>>>09 January 2004 01:25:16 ERR FTP: problem during upload: Requested
>>>action not taken. File unavailable (e.g., file not found, no access).
>>>( 40550)
>>>
>>>I have checked files exist - many times. tried all sorts of
>>>different things - no avail,
>>>
>>>Help!
>>>
>>>Andy
>>>
>>Regards,
>>
>>Gene
>> [EMAIL PROTECTED]
>> http://www.eclipse.net/~njkat
>>
>>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>>With the following in the body of the message:
>> unsubscribe SAlive
>>
>>
>Regards,
>
>Gene
> [EMAIL PROTECTED]
> http://www.eclipse.net/~njkat
>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>With the following in the body of the message:
> unsubscribe SAlive
>
>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>With the following in the body of the message:
> unsubscribe SAlive
>
>
Regards,
Gene
[EMAIL PROTECTED]
http://www.eclipse.net/~njkat
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
