Any APC UPS with Network capabilites (we use Matrix 5000, SmartUPS 750,
SmartUPS 1500, ...)
Status .1.3.6.1.4.1.318.1.1.1.4.1.1
% of Full Capacity
1.3.6.1.4.1.318.1.1.1.2.2.1.0
Bad Batteries
1.3.6.1.4.1.318.1.1.1.2.2.6.0
Load % .1.3.6.1.4.1.318.1.1.1.4.2.3
Battery Temp
1.3.6.1.4.1.318.1.1.1.2.2.2.0
Any APC Environmental Monitor (we use AP9319s)
Probe 1 Temperature .1.3.6.1.4.1.318.1.1.2.1.1.0
Probe 1 Humidity .1.3.6.1.4.1.318.1.1.2.1.2.0
Probe 2 Temperature .1.3.6.1.4.1.318.1.1.2.1.3.0
Probe 2 Humidity .1.3.6.1.4.1.318.1.1.2.1.4.0
Contact Zone 1
1.3.6.1.4.1.318.1.1.2.2.2.1.5.1
Contact Zone 2
1.3.6.1.4.1.318.1.1.2.2.2.1.5.2
Contact Zone 3
1.3.6.1.4.1.318.1.1.2.2.2.1.5.3
Contact Zone 4
1.3.6.1.4.1.318.1.1.2.2.2.1.5.4
Cisco VPN Concentrator (we use model 3005)
Currently active LAN-to-LAN sessions
1.3.6.1.4.1.3076.2.1.2.17.1.7.0
Novel Groupwise 5.5
GWIA Link Status
1.3.6.1.4.1.23.2.70.1.3
GWIA Foreign Link Status .1.3.6.1.4.1.23.2.70.1.4
Hope this helps!!!!
Michael D. Shook
Technical Analyst
[EMAIL PROTECTED]
863 668 4477 (work)
863 860 4070 (cell)
863 665 1261 (fax)
www.saddlecrk.com
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Dirk Bulinckx
Sent: Wednesday, January 12, 2005 7:09 AM
To: [email protected]
Subject: [SA-list] SNMP OID examples
Hi,
If you're already using SNMP to monitor your system(s), could you share some
interesting OIDs with me?
I'm looking for some OIDs that we can use as examples on our website. A
good one would be an OID that shows an "OUT OF PAPER" error on a printer or
a "line" that is down (on a router). I know that those could be (or better
will be) specific to a make of printer/router or even a specific model but
that isn't a problem, we just want to give some real examples about it.
(do include the make/model for which you're using this OID).
You can send this directly to me or to the list.
Thanks.
Dirk.
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
