----------------------------------------------------------------------------
Thank
you,
Pete Kretche
MCP, A+
Network Systems Administrator
UW - Green
Bay
920.465.5014
[EMAIL PROTECTED]
"There are 10 types of people in this world. Those who understand binary and those who don't." - Unknown
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Koska, Bob
Sent: Monday, January 31, 2005 9:02 AM
To: [email protected]
Subject: RE: [SA-list] Win XP - SP2 will not respond to SA
I have installed and am running Ethereal on both the XP-SP2 and
SA
machines. Both machines are on the same
subnet.
When I ping SA from XP I see the ping request and reply on
both
machines.
When I ping XP from SA I see only the ping requests on the SA
machine
and nothing on the XP machine.
Since pinging SA from XP works, I have to believe that all of
the
network and physical layer stuff is OK. It
almost seems as though the
NIC on the XP machine is
filtering out the inbound ping even before the
packet
capture driver can log it. I uninstalled the NIC and let XP
rediscover it then downloaded the latest driver and updated
it. No
change.
Bob.
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On
Behalf Of [EMAIL PROTECTED]
Sent: Sunday, January 30, 2005 7:22 PM
To:
[email protected]
Subject: RE: [SA-list] Win XP - SP2
will not respond to SA
Bob,
One option is to run Ethereal to determine if your WinXP machine
NIC
receives AND reply to the ping request.
This might give you some clue on what is the cause.
Regards,
Pua Ching Leong
"David Webster"
<[EMAIL PROTECTED] To:
<[email protected]>
com> cc:
Sent
by:
Subject: RE: [SA-list]
Win XP - SP2 will not
respond to
SA
[EMAIL PROTECTED]
stone.nu
31/01/2005 08:49
Please respond to
salive
Bob-
First I would say check all the TCP/IP stuff on the target XP
box and
the source box. If nothing can reach it
then either a) nothing is
leaving the source box,
b)nothing is finding (routing or subnet issue)
the
target box or c)things are finding their way to the target box, but
are being blocked somewhere a la a firewall. Are IP,
subnet, gateway,
DNS correct on both machine? Can
both machines ping (in this order)
loop back IP, NIC IP,
gateway IP, external IP?
A while back in the thread you asked about enabling
Netbios. Look on
the WINS tab in TCP/IP of the
relevant network connection.
XP SP2 firewall has some decent logging built into it.
Perhaps turning
the FW on, enable logging, and then try
to hit (figuratively) the
machine for a while, and then
take a look at what it is in the log.
Good luck.
David
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On
Behalf Of Koska, Bob
Sent:
Saturday, January 29, 2005 12:44 PM
To:
[email protected]
Subject: RE: [SA-list] Win XP - SP2
will not respond to SA
Everything shows up as "Not Configured"
Bob.
________________________________
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On
Behalf Of Rosiak, John
Sent:
Saturday, January 29, 2005 11:15 AM
To:
[email protected]
Subject: RE: [SA-list] Win XP - SP2
will not respond to SA
Bob,
Check your group policy settings...gpedit.msc
John
________________________________
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On
Behalf Of Koska, Bob
Sent:
Friday, January 28, 2005 9:42 PM
To:
[email protected]
Subject: [SA-list] Win XP - SP2 will
not respond to SA
This is not a SA issue, but it was SA that alerted me to the problem.
I have a WinXP-SP2 machine that I am trying to monitor with SA
and I
cannot get it to respond to anything. I have
tried ping, net view, RDC,
http, telnet, disk space,
..... I have tried to connect from machines
on the
same subnet and from machines on the other side of the network.
I have moved to another office to make sure the problem was not with
the
network jack/cable. I have enabled the
wireless adapter on this machine
and it acts just like
the wired connection.
Before you ask, yes all of the respective services are turned ON
and
working.
Before you ask, yes
the WinXP-SP2 firewall is turned OFF and there is no
other firewall software installed, that I know of.
>From the WinXP machine itself everything seems to work
OK. I can ping,
net view, telnet and RDC out to
any other machines on my network.
Internet access is
OK. I have the Win2003 server admin pack installed
and I can easily attach to any number of Win2003 servers and
manage
their services via the appropriate snapins to
MMC. I am using this
machine and MS Outlook 2003
to compose and send this email.
This one has me pulling out what little hair I have left.
Any one have
any ideas as to why this machine will not
respond to any probes from the
network ???????
Bob.
________________________________
The information contained in this message is intended only for
the
recipient, and may be a confidential attorney-client
communication or
may otherwise be privileged and
confidential and protected from
disclosure. If the
reader of this message is not the intended recipient,
or
an employee or agent responsible for delivering this message to the
intended recipient, please be aware that any dissemination or
copying of
this communication is strictly prohibited. If
you have received this
communication in error, please
immediately notify us by replying to the
message and
deleting it from your computer.
Thank you,
The McGraw-Hill
Companies
________________________________
To unsubscribe from a list, send a mail message to
[EMAIL PROTECTED]
With the following in the body of the
message:
unsubscribe SAlive
To unsubscribe from a list, send a mail message to
[EMAIL PROTECTED]
With the following in the body of the
message:
unsubscribe SAlive
