RE: [SA-list] Numeric paging

[Steven Hay]

Title: Message

Just as a follow up, we replaced the generic modem we had with a new USR modem.  The page tests work every time now.  Not sure why the other modem wasn't paging properly but we seem to have it all working which is all that matters.

 

Thanks for the help,

 

Steve

 

-----Original Message-----
From: Dirk Bulinckx [mailto:[EMAIL PROTECTED]
Sent: February 3, 2005 11:06 PM
To: salive@woodstone.nu
Subject: RE: [SA-list] Numeric paging

And what happends if you use "person" or "team" to send it to? It's only then that it will do the convertion and show it within the log.

 

Dirk.

 

---

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven Hay
Sent: Friday, February 04, 2005 12:47 AM
To: 'salive@woodstone.nu'
Subject: RE: [SA-list] Numeric paging

This is what the log says:

February 3, 2005 4:39:10 PM Page simulator failed due to a successrate of only 0%
February 3, 2005 4:39:36 PM Had some problems during the page

 

If I don't have the phone number listed under setup.

 

I'm running 5.0.1680.  The upgrade seemed to go great, without any noticable problems.  I can see under the person their phone numbers (which I've double checked as correct) and this is the same people who get E-mails for non-critical on-call system failures (which works post-upgrade).

 

I have to say v5 is pretty fantastic overall we can really get creative with our checks and reactions to something down.

 

Steve

 

-----Original Message-----
From: Dirk Bulinckx [mailto:[EMAIL PROTECTED]
Sent: February 3, 2005 4:27 AM
To: salive@woodstone.nu
Subject: RE: [SA-list] Numeric paging

What version of SA are you using?

What does the logfile show?

 

(looking at the source code the convertion from a person/team to a (list of) number(s) should be done correctly, and if it's converted it should also take in account a persons schedule).

 

 

Dirk.

 

---

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven Hay
Sent: Wednesday, February 02, 2005 11:44 PM
To: salive@woodstone.nu
Subject: [SA-list] Numeric paging

I'm trying to configure numeric paging so that it will contact whoever is on call after hours is certain checks fail.

 

I've set up phone numbers under the persons "pager" information, similar to how we have E-mail set up (and E-mail works fine).

 

If under setup - numeric paging I put a phone number in (lets say mine) and then run a failure test - it will call my number instead of who is on call (as defined in the SA check).  If I remove the phone number from under setup no one gets a phone call on a failure.

 

We've been working around it by changing the phone number of the person who is on call under setup, but obviously this work around isn't a long term solution as we're trying to avoid manual processes that can get forgotten or missed.

 

I've tried using TAPI vs the direct COM port, but neither seem to make a difference to this working. 

 

Any thoughts?

Steve

Please note that Internet email is not always private, secure or reliable. The sender accepts no liability for any damages caused by any virus inadvertently transmitted with this email. Any opinion expressed in this email is solely that of the author, unless clearly indicated otherwise. This email, and any attachments, may contain confidential and/or proprietary information that is intended only for use by the addressee. If you are not the intended recipient, any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you received this email in error, please delete the email and advise the sender of the delivery error.

Please note that Internet email is not always private, secure or reliable. The sender accepts no liability for any damages caused by any virus inadvertently transmitted with this email. Any opinion expressed in this email is solely that of the author, unless clearly indicated otherwise. This email, and any attachments, may contain confidential and/or proprietary information that is intended only for use by the addressee. If you are not the intended recipient, any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you received this email in error, please delete the email and advise the sender of the delivery error.