Dell poweredge servers, with dells server administrator loaded, checks performed using snmp from servers alive
(and there is a bit of a trick to get these working against a 2003 server) Peter peter hoermann >< electronics for imaging bv. > < NL +31 20 658 8092 >< UK +44 20 8476 7689 >< DE +49 2102 745 4489 >< FR +33 1 4179 0002 > -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Wednesday, 9 February 2005 14:02 To: [email protected] Subject: RE: [SA-list] Environmental monitoring And do you check them with Servers Alive (SNMP?) Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dolinar, Jon Sent: Wednesday, February 09, 2005 1:59 PM To: [email protected] Subject: RE: [SA-list] Environmental monitoring Falcon-Lite environmental sensor with a water leak detection sensor hooked up Tripp-Lite SNMP solo environmental adapters for temperature and humidity. Jon Dolinar Manager, network security Cuyahoga Community College -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Tuesday, February 08, 2005 1:55 PM To: [email protected] Subject: [SA-list] Environmental monitoring I would like to know what kind of environmental sensors you're using. And if you're using them together with Servers Alive (and if so what check type are you using for them) Dirk. To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
