Hi, can anybody help us to configure SMS-alarm messages? We use Vodafone D2 SMSC. We try the recommended settings from mail archive (RE: SMS to D2, Oct 19, 2000), but we do not success. We try to reduce the modem speed (9600Bd, 2400Bd), but still get the same error (see log at the end of the mail). There is no hardware error. We install a free program (vodafone d2-messagego) and send successfully a SMS (this program calls 01722278025 to send the message)
Thanks, Peter Rohnacher ______________________________________ we make your net work InterConnect GmbH Am F�cherbad 3 76131 Karlsruhe Tel.: +49 721 6656-0 Fax.: +49 721 6656-515 mailto:[EMAIL PROTECTED] http://www.interconnect.de Donnerstag, 10. M�rz 2005 16:39:01 PAGING : Comm 0 Donnerstag, 10. M�rz 2005 16:39:01 PAGING : PFormat 3 Donnerstag, 10. M�rz 2005 16:39:01 PAGING : LEG Donnerstag, 10. M�rz 2005 16:39:01 PAGING : AUTH Donnerstag, 10. M�rz 2005 16:39:01 PAGING : OPER 1 Donnerstag, 10. M�rz 2005 16:39:01 PAGING : RECPFOR 100 Donnerstag, 10. M�rz 2005 16:39:01 PAGING : RECPNR Donnerstag, 10. M�rz 2005 16:39:01 PAGING : RECIP 01736554800 Donnerstag, 10. M�rz 2005 16:39:01 PAGING : REQ F Donnerstag, 10. M�rz 2005 16:39:01 PAGING : SENDER Donnerstag, 10. M�rz 2005 16:39:01 PAGING : TEXT Servers Alive test message at 16:39:01 Donnerstag, 10. M�rz 2005 16:39:01 PAGING : SMSC 0,01722278020 Donnerstag, 10. M�rz 2005 16:39:01 PAGING : PROTO 0 Donnerstag, 10. M�rz 2005 16:39:02 UCP DEBUG: Starting sending thread. ( 26400) Donnerstag, 10. M�rz 2005 16:39:02 UCP DEBUG: Sending thread starting up. ( 26400) Donnerstag, 10. M�rz 2005 16:39:02 UCP DEBUG: Logon procedure started. ( 26101) Donnerstag, 10. M�rz 2005 16:39:07 UCP DEBUG: Logon: OK. ( 26103) Donnerstag, 10. M�rz 2005 16:39:27 UCP DEBUG: Remote party disconnected ( 26012) Donnerstag, 10. M�rz 2005 16:39:27 UCP STATUS: Message sending failed. (ID: 14) ( 26315) Donnerstag, 10. M�rz 2005 16:39:27 UCP STATUS: The transmission is completed. (ID: -1) ( 26313) Donnerstag, 10. M�rz 2005 16:39:27 UCP remove #PHONE=01736554800#MESSAGE=Servers Alive test message at 16:39:01#REDI=0#(#PHONE=01736554800#MESSAGE=Servers Alive test message at 16:39:01#REDI=0#) To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
