What message does it give?
Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ziots, Edward Sent: Thursday, January 12, 2006 10:10 PM To: '[email protected]' Subject: [SA-list] Event Log Com Check Having issues... Trying V2 on my SA 5.0.1748, looking for a listing of 32968 Schannel errors which I see 4 of them on my DC's System log I enter in all the correct information based on the fields in the External COm check ( also using a username and password with domain admin privileges so I can use this account to look at the logs regularly, I already checked that) and no matter how high I set the timeout I dont get anything back on the check. Anyone else run into this, or have some helpful hints on what they successfully configured them for. Feel free to email me directly at [EMAIL PROTECTED] Thanks EZ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Greg Marr Sent: Wednesday, December 21, 2005 11:46 PM To: [email protected] Subject: RE: [SA-list] Event Log Com Check Works a charm! Again, thank you for your responses. Greg -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Thursday, 22 December 2005 1:22 AM To: [email protected] Subject: RE: [SA-list] Event Log Com Check V2 is on the site now....http://www.woodstone.nu/salive/addons.asp Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Greg Marr Sent: Tuesday, December 20, 2005 11:19 PM To: [email protected] Subject: RE: [SA-list] Event Log Com Check Thanks very much for your help guys. Looking forward to V2! Greg -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Wednesday, 21 December 2005 8:13 AM To: [email protected] Subject: RE: [SA-list] Event Log Com Check Wait until tomorrow and it will be released :-) Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Busalacchi, Eric Sent: Tuesday, December 20, 2005 9:55 PM To: [email protected] Subject: RE: [SA-list] Event Log Com Check Is there a link to download the beta? Eric -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Tuesday, December 20, 2005 11:17 AM To: [email protected] Subject: RE: [SA-list] Event Log Com Check V2.x which is no longer using WMI is ready I just need to integrate the help file with it and post it on the web. The beta tests show it to be working much better. Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Busalacchi, Eric Sent: Tuesday, December 20, 2005 4:24 PM To: [email protected] Subject: RE: [SA-list] Event Log Com Check I was getting alerted the first time (as described in the initial email from Greg) when running SA on W2K3 STD. When I switched over to W2K I was no longer seeing that behavior. I know that's not a ton of useful information but I figured I would throw it out there. Eric -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Passow Sent: Tuesday, December 20, 2005 8:23 AM To: [email protected] Subject: Re: [SA-list] Event Log Com Check I have reported this issue several times. Version 1.0.0.14 of the com check here and I get alerted on the first cycle. Jason Passow Mississippi Welders Supply [EMAIL PROTECTED] ph: (507) 494-5178 fax: (507) 454-8104 "If you do everything right, nobody will realize you've done anything at all." Dirk Bulinckx wrote: > On the first cycle after a restart it should only give a down IF there > is a connection problem (as the first cycle sets the checkpoint). > On the next cycle(s) a down can also mean matching entries. > > > > > Dirk. > > > > ------------------------------------------------------------------------ > *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > *On Behalf Of *Greg Marr > *Sent:* Tuesday, December 20, 2005 12:49 AM > *To:* [email protected] > *Subject:* [SA-list] Event Log Com Check > > Hi > > I'm after a bit of advice on the EventLog Check.... > > We're currently checking for 'Error' messages in the 'System' log and > while SA is running, it works beautifully. However, when we re-start > the SA service, we are alerted to the presence of error messages - > even if we have been alerted about that particular message previously. > I would have thought that SA would store a 'checkpoint' > to ensure that you only get one alert per error message..... > > Have I misconfigured something or is this by design? > > Configuration: > > * EventLog Check - V1.0 Build 17 > * Give Down when - "at least one" > * Logfile - "System" > * Return - "Last Matching Entry" > > Greg > > ********************************************************************** > > This email and any files transmitted with it are confidential and > > intended solely for the use of the individual or entity to whom they > > are addressed. If you have received this email in error please notify > > the system manager. > > ********************************************************************** > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
