RE: [SA-list] Problem with URL check after update to 5.1

[Dirk Bulinckx]

From the logging you would expect SA to send a next frame with the usename/password, which SA isn't doing. The only reason I can see for that is that within the response frame (with the 401) there is an error. Do you have a sniffer (netmon or ethereal)?  If so can you make a network trace of SA doing the check and one of IE (or other browser) making a connection?  And send me those 2 traces (off list)   Dirk.   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Klein Sent: Saturday, January 28, 2006 12:44 AM To: salive@woodstone.nu Subject: Re: [SA-list] Problem with URL check after update to 5.1 Hi Dirk,   I attached the lines from the log pertaining to the error...   Thanks     ----- Original Message ----- From: Dirk Bulinckx To: salive@woodstone.nu Sent: Friday, January 27, 2006 6:23 PM Subject: RE: [SA-list] Problem with URL check after update to 5.1 Create HKEY_LOCAL_MACHINE\SOFTWARE\DBU Consulting\Servers Alive\StartUp\logHTTP (dword) You can log all communication during an HTTP/HTTPS check to a file so that you can debug the process. Enter a value of 1 in the registry entry to enable this feature. with a value of 1   HKEY_LOCAL_MACHINE\SOFTWARE\DBU Consulting\Servers Alive\StartUp\logHTTPFIle (string) You can log all communication during an HTTP/HTTPS check to a file so that you can debug the process. Enter the path and name of the file log. with a value of "c:\http.log"   Then start SA and run 1 cycle. Stop SA and change the logHTTP value from 1 to 0   Within the logfile (c:\http.log) we should be able to see the type of authentication and what was send.     I'm not sure it's an authentication failure.  Can you from the system running SA access that HTTP interface using a browser?   Dirk.   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Klein Sent: Friday, January 27, 2006 11:46 PM To: salive@woodstone.nu Subject: Re: [SA-list] Problem with URL check after update to 5.1 It simply puts up a window prompting for a username and password. It's from a DLINK wireless access point that is managed via an HTTP interface. Again, it was working fine until the upgrade.... is there a way I can turn on a debug mode to see more detailed log messages?   Thanks,   Mike   ----- Original Message ----- From: Dirk Bulinckx To: salive@woodstone.nu Sent: Friday, January 27, 2006 2:47 PM Subject: RE: [SA-list] Problem with URL check after update to 5.1 What type of authentication is required by the server?   Dirk.   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Klein Sent: Friday, January 27, 2006 8:24 PM To: salive@woodstone.nu Subject: [SA-list] Problem with URL check after update to 5.1 Hello,   After upgrading from SAlive version 5.0.1799 to the new version 5.1.1958, I'm having a problem with one URL check which requires a username and password. Here are the results of the check as seen in the log file: Friday, January 27, 2006 11:47:30 AM Wireless AP Friday, January 27, 2006 11:47:30 AM URL check (http://192.168.0.8) : Friday, January 27, 2006 11:47:30 AM URL check (http://192.168.0.8) failed with 401 Unauthorized Friday, January 27, 2006 11:47:30 AM URL check took 328 ms I checked the username and password and they are correct. Is SAlive passing the correct credentials to the web page?   Thank you,   Michael