Unfortunately, I got it all set up and working (it uses page.ca to send the message) and I find out there is a CAPTCHA installed to combat message spam. When posted from the web site there is no verification, likely due to the REFERRER header from a trusted site, or there may be a limit to the number of messages sent per day, which reduces the usefulness. I'll leave it set up to try in 24 hours to see if the latter is the case.
On Thursday, June 15, 2006 12:40 PM, Richard Sleegers <[EMAIL PROTECTED]> wrote: > That looks exactly right, not sure how I overlooked it. I suppose I was > looking for an overall Setup Alert that I could call from each entry, much > like e-mail parameters are set up once and re-used. It would appear that I > need to repeat the Post instructions for each entry. So if there is a > change > to the site I would need edit all applicable entries, since the Global > Change feature does not look for http(s) get/post entries. > > On Thursday, June 15, 2006 12:15 PM, Dirk Bulinckx <[EMAIL PROTECTED]> > wrote: > >> Servers Alive v5.1 can do this. >> Edit the entry - on the ALERTS tab select ADD alert - http(s) get/post >> >> >> Dirk Bulinckx. > > To unsubscribe send a message with UNSUBSCRIBE as subject to > [email protected] > If you use auto-responders (like out-of-the-office messages), then make > sure > that they are not send to the list nor to the individual members of the > list > that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
