----- Original Message -----
Sent: January 09, 2006 09:50
Subject: RE: [SA-list] Mibs for Smart-UPS
RT 10000XLI
Based on the APC web site, if you installed a network
management card in the smart slot then it will give you the SNMP
connectivity.
You can use any one of these (from APC
website):
-----------------------
Network Management Card
Products Part
Number
UPS Network Management
Card AP9617
UPS Network Management Card w/
Environmental Monitoring & Out of Band Management
AP9618
UPS Network Management Card w/ Environmental
Monitoring AP9619
------------------------
After you've done this then the MIB is on the CD that came with the
Management card, and using GETIF (Clusty search for the free software - it's a
MIB walker) you can find the OIDs you need to monitor. Then it's a simple
matter to have SA check it.
Personally my fav is the 9619 so I can monitor temp and humidity in the
data closet as well.
As
for the OIDs I've used, here's a basic few. NOTE: depending on the card
you install not all of these will be available:
------------------------
.1.3.6.1.4.1.318.1.1.1.2.2.1.0
APC UPS Advanced Battery
Capacity
.1.3.6.1.4.1.318.1.1.1.2.2.2.0 APC
UPS Advanced Battery
Temperature
.1.3.6.1.4.1.318.1.1.1.2.2.3.0
APC UPS Advanced Battery Run Time
Remaining
.1.3.6.1.4.1.318.1.1.1.2.2.4.0
APC UPS Advanced Battery Replace
Indicator
.1.3.6.1.4.1.318.1.1.1.2.2.6.0
APC UPS Advanced Battery Number of Bad Battery
Packs
.1.3.6.1.4.1.318.1.1.1.3.2.5.0
APC UPS Advanced Input Line Fail
Cause
.1.3.6.1.4.1.318.1.1.1.4.1.1.0
APC UPS Basic Output
Status
.1.3.6.1.4.1.318.1.1.1.4.2.3.0
APC UPS Advanced Output
Load
.1.3.6.1.4.1.318.1.1.1.7.2.3.0
APC UPS Advanced Test Diagnostic
Results
.1.3.6.1.4.1.318.1.1.1.7.2.4.0
APC UPS Advanced Test Last Diagnostics
Date
.1.3.6.1.4.1.318.1.1.2.1.1.0 APC
UPS Environment Ambient
Temperature
.1.3.6.1.4.1.318.1.1.2.1.2.0
APC UPS Environment Relative
Humidity
.1.3.6.1.4.1.318.1.1.2.1.3.0
APC UPS Environment Ambient Temperature
2
.1.3.6.1.4.1.318.1.1.2.1.4.0 APC
UPS Environment Relative Humidity
2
.1.3.6.1.4.1.318.1.1.2.2.2.1.5.1 APC UPS
Contact Entry
1
.1.3.6.1.4.1.318.1.1.2.2.2.1.5.2 APC UPS
Contact Entry
2
.1.3.6.1.4.1.318.1.1.2.2.2.1.5.3 APC UPS
Contact Entry
3
.1.3.6.1.4.1.318.1.1.2.2.2.1.5.4 APC UPS
Contact Entry 4
--------------------------------
Also, Note, if you are monitoring a large number of APC UPSs (like in a
campus environment) then I recommend purchasing APCs ISX Manager. It will do
all monitoring of devices for you and even keep their firmware up to
date!!!
Hope
this helps!!!!!
Michael D. Shook
Technical Analyst
[EMAIL PROTECTED]
863 668
4477 (work)
863 860 4070 (cell)
863 665 1261 (fax)
www.saddlecrk.com
Just checking whether anyone is using SAlive to
monitor a Smart-UPS RT 10000XLI? If so what/how are they using SAlive
to perform the checks and any MIBS etc available to
share.
Thanks
Play Santa's Celebrity Xmas
Party, an exclusive game from Yahoo!
