Getting "No such name", means that the SNMP 'service' or daemon is answering (and running) but that the OID is not correct. Adding a .0 at the end often helps.
Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of David Bruck Sent: Tuesday, July 11, 2006 10:56 PM To: Servers Alive Discussion List Subject: [SA-list] SNMP For v4.1 When setting up a check in v4.1, we are getting, ERR: No Such Name. I know the box is pingable, because that check works. I know the community string is correct. I know the OID entered is correct. Any thoughts other than upgrading? Dave To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
