Do you have a SCSI array in the server (PERCx). If you do, look for the 10893.mib file. It is probably on the server itself. Here is one of the oid's that I look for to check a disk drive in a Dell SCSI array
1.3.6.1.4.1.674.10893.1.1.130.4.1.4.1 >>> [EMAIL PROTECTED] 1/8/2007 4:50:13 PM >>> Hello all and a Happy New Year to all of you! I have just started to add SNMP-checks and try to find out what the OID is for Disk-drives on a DELL server. I have tried GetIf and Mibs from Dell but they are not showing anything. Are not able to MBrowse at all. I have no problems with the same checks for HP Proliant servers. If I do a SNMPWALK of the server I got a huge list of OID's but are not able to see which one are for "disk-lights" Anyone doing this type of checks? Best regards Per To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
