I installed the vew version (6.1.2150) ontop of the old one(2149), like I did before. This time, removing that Threading registry key, then starting the new version and it locked up on the first check. Stopped dead. Just thought I'd let you know.
Frank Brower Network Administrator Olson Research Group 300 Phillips Blvd. Suite 100 Ewing, NJ 08618 609-882-9888 Fax: 609-359-2003 -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Wednesday, July 11, 2007 3:36 AM To: Servers Alive Discussion List Subject: RE: [SA-list] New version locking up Hi, As you know the updated logging of SA did make SA hang on your system (threading enabled), and we were never able to reproduce the problem. The developper did take a look at it and found a possible cause of this hanging. Would it be possible for you to test this updated logging? The salive61.exe installed that is on http://beta.woodstone.nu has been updated with the updated logger component (the version of SA didn't change for that). Could you install it (re-enabled the treading by setting HKEY_LOCAL_MACHINE\SOFTWARE\DBU Consulting\Servers Alive\Log\Threading to 1) and try it? If it hangs again, then you can simply reset the registry value back to 0. Thanks. Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Frank Brower Sent: Thursday, July 05, 2007 4:51 PM To: Servers Alive Discussion List Subject: RE: [SA-list] New version locking up Thank you for the fix. After installing the latest beta version and adding that registry key, all is working fine, as usual. Keep up the good work. Frank Brower Network Administrator Olson Research Group 300 Phillips Blvd. Suite 100 Ewing, NJ 08618 609-882-9888 Fax: 609-359-2003 -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Thursday, July 05, 2007 9:01 AM To: Servers Alive Discussion List Subject: RE: [SA-list] New version locking up There is an possible fix on the beta site Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Frank Brower Sent: Thursday, July 05, 2007 2:51 PM To: Servers Alive Discussion List Subject: RE: [SA-list] New version locking up In the middle of an update, it just stops. If I press Update, it'll work for a bit, then stop again, and not always in the same place. I tried ending the Service, and re-starting it, but it usually locked up on Stopping the service. I reset the PC(running windows 2000), and again, it'll work for one or 2 checks, then stop again. Don't know what is causing it. Again, the version I backgraded to v2125, is working fine, without issue. Frank Brower Network Administrator -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Wednesday, July 04, 2007 4:56 PM To: Servers Alive Discussion List Subject: RE: [SA-list] New version locking up What build are you talking about? Define "locked up". Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Frank Brower Sent: Wednesday, July 04, 2007 10:31 PM To: Servers Alive Discussion List Subject: [SA-list] New version locking up I am using v6.1.2125 of SAlive. I have tried upgrading to the latest beta version of SAlive, and it locked up almost everytime it tried to update. Other then that, the betas for me have been pretty stable. Frank Brower Olson Research Group To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
