Can you set HKEY_LOCAL_MACHINE\SOFTWARE\DBU Consulting\Servers Alive\Log\Threading (dword) with a value of 0
Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Lentes, Bernd Sent: Friday, October 19, 2007 9:15 AM To: Servers Alive Discussion List Subject: [SA-list] SA 6.1.2171 still running, but hangs in a check cycle Hello ML, i'm using the mentioned version. I installed it because i had problems with 6.0.2056 (see "how to check SSL-sites). I installed it over the old version. Now SA seems to hang in a check cycle since yesterday afternoon. I see: "Waiting for threaded checks (2 (T8) 1)" in the status line. The last log entry is: 18.10.2007/16:36:27 SA ERR : FillDUNCmbwithCMB : 11 - Division by zero- 0 (This is yesterday afternoon) The built in webserver says "Last check done on Donnerstag, 18. Oktober 2007 at 16:33:01" Any ides ? Thanks Bernd -- Bernd Lentes staatl. geprüfter Techniker Systemadministration Institut für Entwicklungsgenetik GSF Raum 35/1008f Ingolstädter Landstraße 1 85764 München-Neuherberg mailto:[EMAIL PROTECTED] phoneto:089/3187-1241 faxto:089/3187-3826 http://www.gsf.de/idg To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
