Dirk,
I have some SNMP Trap alerts setup on 6.1.2195 .
I am not filtering any OID’s I don’t seem to be getting all the
info in the trap.
I have another SNMP trap receiver that does get all the info.
Below is the received SA alert
“Trap received from 10.12.1.5 trigger rule Host 1 With
.iso.org.dod.internet.private.enterprises.intercall.iccProduct.isos.isosSoftware.isosSystemAlarm.isosLastSysAlarmSeverity=MajorAlarm
.iso.org.dod.internet.private.enterprises.intercall.iccProduct.isos.isosSoftware.isosSystemAlarm.isosLastSysAlarmNodeNum=2
.iso.org.dod.internet.private.enterprises.intercall.iccProduct.isos.isosSoftware.isosSystemAlarm.isosLastSysAlarmSpanNum=95”
This is a snip from the MIB of the info that is missing
--
-- Span Alarms
--
spanDead TRAP-TYPE
ENTERPRISE intercall
VARIABLES { isosLastSysAlarmSeverity,
isosLastSysAlarmNodeNum,
isosLastSysAlarmSpanNum }
DESCRIPTION
" Carrier Group Alarm (CGA) or span dead. "
::= 71
spanExcessiveSlips TRAP-TYPE
ENTERPRISE intercall
VARIABLES { isosLastSysAlarmSeverity,
isosLastSysAlarmNodeNum,
isosLastSysAlarmSpanNum }
DESCRIPTION
" Excessive Burst of Slips. "
::= 72
spanJ1Failure TRAP-TYPE
ENTERPRISE intercall
VARIABLES { isosLastSysAlarmSeverity,
isosLastSysAlarmNodeNum,
isosLastSysAlarmSpanNum }
DESCRIPTION
" J1-specific Failure. "
::= 73
To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected]
If you use auto-responders (like out-of-the-office messages), then make sure
that they are not send to the list nor to the individual members of the list
that send a message. Doing this will get you removed from the list.
