TIME checker Could you provide some instructions for use for this com check? I was having some difficulty with it, but have it figured out now. I was getting ERR: Overflow( 70) every time it ran.
The configuration I’ve got set right now is: Time Server: nearest domain controller Max Difference: SNTP protocol (although I’ve tried both with the same result Max difference: 3600 The problem I had is that I expected to provide the max difference in milliseconds, not seconds and thus had used a max difference of 3600000. The other issue I see with it is that I’d like to see the results as a numeric value so it can be graphed with RRDTool (can com check results be graphed?). We have checks already built for checking time drift on our servers, but would change to using the com check if it provides the same functionality we have now. I also noticed the installer also says “Welcome to the SolusVM – VPS checker Setup Wizard”. Regards, Brett Hanson Systems Analyst, Agrium Inc. From: Servers Alive Discussion List [mailto:[email protected]] On Behalf Of Dirk Bulinckx Sent: Thursday, July 12, 2012 4:16 AM To: Servers Alive Discussion List Subject: [SA-list] TIME checker There is a new COM check on http://www.woodstone.nu/salive/addons.php (http://www.woodstone.nu/salive/addons.php) It will enable you to check the time on the system running the check (compare it to the time retrieved from a time server) Dirk Bulinckx Servers Alive - http://www.woodstone.nu (http://www.woodstone.nu) StellarDNS (DNS Hosting) - http://www.stellardns.com (http://www.stellardns.com) To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. -------------------------------------------------------------------------------- IMPORTANT NOTICE ! This E-Mail transmission and any accompanying attachments may contain confidential information intended only for the use of the individual or entity named above. Any dissemination, distribution, copying or action taken in reliance on the contents of this E-Mail by anyone other than the intended recipient is strictly prohibited and is not intended to, in anyway, waive privilege or confidentiality. If you have received this E-Mail in error please immediately delete it and notify sender at the above E-Mail address. Agrium uses state of the art anti-virus technology on all incoming and outgoing E-Mail. We encourage and promote the use of safe E-Mail management practices and recommend you check this, and all other E-Mail and attachments you receive for the presence of viruses. The sender and Agrium accept no liability for any damage caused by a virus or otherwise by the transmittal of this E-Mail. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
