> Van: Edwin Blink <[EMAIL PROTECTED]> > Aan: [EMAIL PROTECTED] > Onderwerp: Re: Master & Slave > Datum: Monday, September 21, 1998 2:47
> - Often you need to take the jumper from the Slave and add it to the > master.(jumper on SP(=SlavePresent) and on DS (Drive Select) ) Well it appeared that both drives are ATA compliant, so after al it was easy to set the jumpers to (both are Seagates remember): 0000 Master x000 Slave 0000 x000 This works for both drives, being master or slave and vice versa. You need to switch drives by poking dvar 34 with either &A0 (master) or &B0 (slave) and then call dvar 35 For the moment it works, so maybe you should take a look at the HCCS meeting in Bunnik. -- Robert van der Veeke, aka RJV Graphics [EMAIL PROTECTED] Currently listening to : Saving Private Ryan
