----- Original Message ----- From: Si Owen <[EMAIL PROTECTED]> To: <[email protected]> Sent: Donnerstag, 22. Juni 2000 13:12 Subject: RE: Simcoupe 0.8 Alpha
> Ian Spencer wrote: > > I know Si hasn't included foreign keyboards yet and my system > > is German. > Si Wrote: > If your using an older EXE (named as WinCoupe.exe) then the symbols should > be in the right place, but other keys that differ from UK/US layouts may be > wrong. The newer SimCoupe.exe versions should do mappings for the other > keys too (tested with the AZERTY layout with French keyboard layout). I've done a few tests with the old version of Wincoupe 11.99 there was no mapping but all of the keys worked as expectd. With the new 0.8 version the mapping works which means on the Geman keyboard the Z and Y key positions are swapped over correctly (the only change to non-symbol characters on the German keyboard compared to UK/USA) > Ian wrote: > > Whereas 1 to 6 work normally very strange! Has anyone else noticed > problems? >Si wrote: > Very strange indeed! Hopefully you're just using an old EXE and can update > yours with http://homepage.ntlworld.com/simon.owen/SimCoupe.zip. I'll see if > I can reproduce it using a German keyboard layout on my system here... as mentioned the keys 7 to 0 produce the Alternate graphics charactes as does the letter 'q' these are the only non symbol keys which have alternate graphics characters defined for them on the German keyboard. Keys 1 to 6 and the other letters don't have alternate graphics and work normally Anyway Si I hope this helps you to reproduce the problem. Ian
