Hello, I have problems with an OCE plotter driver which sends invalid data. To be more precise: when the driver communicates with a w2k server, the communication looks like this: 1. AddJob 2. StartDocPrinter 3. StartPagePrinter 4. EndPagePrinter 5. ResetPrinter 6. Write Printer (correct data format)
Samba (2.2.6 ff): 1. AddJob 2. StartDocPrinter 3. StartPagePrinter 4. Write Printer (invalid data format) 5. EndPagePrinter Both communications include several EnumJobs and GetPrinter requests. 1st question is: does anyone know, what makes a driver perform this ResetPrinter? (I faked all the printer info 0 fields - did not help)? I thought, that the driver could be forced to create correct output data if the "enable enhanced printing features" box in the advanced-tab could be unchecked. This was not possible due to a hardcoded value in the samba code. question 2: What is the reason to set the attributes of the info_2 struct hardcoded to 0x18 (srv_spoolss_nt.c / check_printer_ok())? Does anything else stops working, if the "=" it is changed into "|="? BTW: This did not fix the problem - I thought the driver would always produce EMF format...:-( bye, Martin -- Martin Zielinski [EMAIL PROTECTED]
