Hi all, Can you please help me out with problem I seem to have with Volumes sets on VMS and SAMBA not refreshing the PC browser.
VMS 7.3-2 SAMBA 2.2.8a The problem is that we have a 2 disk Volume set setup and working. The problem is that possible SAMBA does not quite workout the location of the files and changes or is unable to refresh the PC browser correctly. VMS shows that the changes have taken place yet the PC is unable to pick up the changes. Is there setting within the GLOBAL settings that we need to apply to get SAMBA and VMS Volume sets working. If the VMS is mount normally, such as the system disk I don't have a problem with access or refresh, might have to F5 on the PC sometimes to get the files up, but in general not a problem. Any points or help will be gratefully received. Andrew King Snet NT/VMS Systems Administrator > Snet IT Support Team (FRN) > Building A3, Room 1019 > T: 01252 45 5435 or (9) 6800 5435 > F: 01252 45 5596 or (9) 6800 5596 > P: 07659 172 140 > E: mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > _________________________________________________________________________ > To contact the Snet team please phone or email myself or one of my > colleagues. > You are always welcome to visit me at my desk. > > To log an IS incident for the Rnet or UDN Networks please > call the Service Desk on x8787 (internally), > or 0870 8718787 alternatively email <mailto:[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > > > "This e-mail is intended for the recipient only. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely upon this e-mail. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail." "Recipients should note that all e-mail traffic on MOD systems is subject to monitoring and auditing." PLEASE READ THIS IMPORTANT ETIQUETTE MESSAGE BEFORE POSTING: http://www.catb.org/~esr/faqs/smart-questions.html
