Ok , You are right. I didn't see I have IRQ conflits on my linux server. This is all ok now.
Thanks. vincent ----- Original Message ----- From: "Van Sickler, Jim" <[EMAIL PROTECTED]> To: "'vincent blondel'" <[EMAIL PROTECTED]>; "Samba ( List )" <[EMAIL PROTECTED]> Sent: Sunday, April 21, 2002 8:55 PM Subject: RE: [Samba] performance problems > Sounds like you have network problems; I'd run a cable tester on > the 100Base-TX connections to the switch/hub to see what they > look like. > > 100Base-TX full-duplex doesn't do as much in the way of packet > validation as 10Base-T half-duplex. If you're using the same > Cat-5 lines for the old 10Base-T and 100Base-TX, they may > have been fine at the slower speed, but corrupting > the data at the higher speed. > > > Try running a ping test to another wkstn on the network > to see if you get a bunch of bad packets-that might > highlight which one (or both) of the nics has a bad line. > > Jim > > -----Original Message----- > From: vincent blondel [mailto:[EMAIL PROTECTED]] > Sent: Sunday, April 21, 2002 1:54 AM > To: Samba ( List ) > Subject: [Samba] performance problems > > > Hi, > > I am trying to set up share folders on my linux slackware 8 with samba > 2.2.0a. I was using two ethernet cards in 10 mb/s with the following > configuration and I had no problem. > > But now, I am using two ethernet cards with 100mb/s connection and I get a > lot of problems. > > I have well read/write access on my share folders ... > I can well copy files from my linux server to my windows workstation ... > but I have lot of problems by copying files from my windows workstation to > my linux server. > > I always get buffers problems, "connection lost" problems. When I copy one > little file, there is no problem and when I copy lot of files, problems are > coming up. I tried to put in my config file "socket options = TCP_NODELAY" > but it doesn't change anything. > > [global] > workgroup = TEST > encrypt passwords = yes > > [vincent] > path = /home/vincent > read only = no > guest ok = yes > > Thanks for your help > Vincent. > -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
