Ferdi: I have the same problem. My solution was change the server NIC card. I put a 3Com one and all works fine. I suggest you upgrade samba software too.
[EMAIL PROTECTED], ha escrito: > Hello, > > I have a severe performance problem when connecting a M$-Client PC with a > Bootdisk and TCP/IP-Stack to my Samba server. > Both machines are linked via a 100Mbit crosslink connection. > The server is running a SuSE Linux 7.2 with Kernel 2.4.19, the smb-fs and > the NIC is compiled into the kernel. > The Client uses a DOS 6.2 bootdisk with the M$ TCPIP-stack version 1.02. > All M$ drivers load fine, the 'net use' command works too. > Then I start Symantecs 'ghost' to create an image from the clients HD and > put it to the used Samba share on the server. > The Performance is poooor (<1Mbyte/min), tests with a W2K server on the > same hardware showed better values (>200Mbyte/min) :-( . > What can I do to improve this poor samba throughput??? > > Regards > Ferdi -- Gustavo Courault e-mail: [EMAIL PROTECTED] http://network-online.com.ar ICQ: 15828353 -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
