Gagneet Singh heeft geschreven:
Hi!We are currently running samba-2.2.7 on a hp9000 k-class server running HP/UX-11.00. I've used the gcc-3.1 compiler to compile the source but any later will do just fine. I've also tried with the HP Ansi-C compiler but this resulted into a binaries with some instability (don't know why).
We have a HP b2600 Workstation, with HP 110x UNIX system, at our work
place. Currently it is lying idle and we would like to utilize it.
Is it possible to put Samba on this machine and use it as a PDC using
the samba suite?
Thank you for your help
Gagneet
One problem I encountered was that _LARGEFILE64_SOURCE was defined. This causes al file operations to be 64bit but locking structures will still only support 32bits causing some problems at runtime. I redefined this to just _LARGEFILE_SOURCE in the Makefile and include/config.h and this went ok.
Good luck
--
Ren� Nieuwenhuizen
Afdeling Informatietechnologie
Centraal Planbureau
Bezoekadres: Van Stolkweg 14, 2585 JR Den Haag
Postadres: Postbus 80510, 2508 GM Den Haag
T (070) 3383 342
F (070) 3383 350
I http://www.cpb.nl/nl/general/org/afdelingen/it/
--
================================================================================
Aan dit bericht kunnen geen rechten worden ontleend.
Het bericht is alleen bestemd voor de geadresseerde.
Indien dit bericht niet voor u is bestemd, verzoeken wij u dit onmiddellijk aan
ons te melden en de inhoud van het bericht te vernietigen.
This message shall not constitute any obligations.
This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and
delete its contents.
================================================================================
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
