On Thu, Feb 04, 2010 at 06:10:14PM -0600, John H Terpstra wrote: > On 02/04/2010 06:05 PM, Mike Fabre wrote: > > On Thu, Feb 04, 2010 at 05:34:41PM -0600, John H Terpstra wrote: > >> On 02/04/2010 05:21 PM, Mike Fabre wrote: > >>> Hello > >>> > >>> I have a network setup with one Samba PDC and two Samba BDCs separated by > >>> routers (ref http://www.cybersource.com.au/users/mikef/samba/). In this > >>> test environment the Samba servers all use the master OpenLDAP server on > >>> the PDC, but the production system will have OpenLDAP servers (using > >>> master-slave replication) on all Samba servers. > >>> > >>> I can't get the Windows XP client to change a password or enroll on the > >>> domain when connected to either of the BDC's networks, however both > >>> functions work fine when connected directly to the PDC's network. If the > >>> XP client is enrolled onto the domain while connected to the PDC's > >>> network then it successfully authenticates against the domain on all > >>> three networks, incl after being relocated to either BDC network. > >>> > >>> Anyone got any ideas what my problem might be? > >> > >> In your smb.conf files for you have "interface only = yes" - if so, > >> remove it and it should work. Check Samba bugzilla - there is a bug > >> report about this. > > > > I don't have that option set in any of the config files, so I tried add > > 'interface only = no' on all three then ran testparm and it said 'Ignoring > > unknown parameter "interface only"'. Is this the bug you are talking about: > > > > https://bugzilla.samba.org/show_bug.cgi?id=6970 > > > > That bug mentions the 'bind interfaces only' and 'interfaces' options which > > I also don't have in any of my config files and when I added it and ran > > testparm it didn't give me an error but the config it gave back didn't have > > either of those options in it. > > You are correct, the parameter is "bind interfaces only = No", See: > https://bugzilla.samba.org/show_bug.cgi?id=6348
OK, well I still don't have that in any of my config files, running 'grep -i inter /etc/samba/smb.conf' on all three machines doesn't give me any output. -- Mike Fabre -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
