En/na Luca Olivetti ha escrit:
Each one of them has problems, the most "stable" of the three is 3.3.12.
This one seems to work fine for a machine already in the domain mapping
shares to drives, but it hangs when trying to browse the server or to
add a machine to the domain.
I now tried both to rebuild 3.0.11 (to see if there is some problem with
my build system), and it still works fine, and 3.3.0 (trying to bisect
when the problem was introduced) and it still fails the same way with a
slight difference:
E.g.
[l...@localhost samba]$ smbclient -L hp
WARNING: The "printer admin" option is deprecated
Enter luca's password:
Domain=[WETRON] OS=[Unix] Server=[Samba 3.3.12]
Sharename Type Comment
--------- ---- -------
print$ Disk
privado Disk Directorio personal
[....]
scanner Disk
IPC$ IPC IPC Service (Samba Server 3.3.12)
ricoh2 Printer Equipo multifuncional con fax
ricoh1 Printer Impresora para eplan
[.....]
deskjet5800 Printer Impresora HdP en color
[here it hangs for a minute or so]
And here, after the minute, instead of this
Receiving SMB: Server stopped responding
session setup failed: Call returned zero bytes (EOF)
NetBIOS over TCP disabled -- no workgroup available
I get this:
Domain=[WETRON] OS=[Unix] Server=[Samba 3.3.0]
Server Comment
--------- -------
HP Samba Server 3.3.0
Workgroup Master
--------- -------
WETRON HP
And smbd dies (with 3.3.12 it also died but not until the next query).
I'm going to try earlier versions.
Bye
--
Luca Olivetti
Wetron Automatización S.A. http://www.wetron.es/
Tel. +34 93 5883004 (Ext.133) Fax +34 93 5883007
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
