Yes Group1 Server ist the wins for all ----------------------------------------------- EDV Daniel Müller
Leitung EDV Tropenklinik Paul-Lechler-Krankenhaus Paul-Lechler-Str. 24 72076 Tübingen Tel.: 07071/206-463, Fax: 07071/206-499 eMail: [email protected] Internet: www.tropenklinik.de ----------------------------------------------- -----Ursprüngliche Nachricht----- Von: Tawanda Kavayi [mailto:[email protected]] Gesendet: Mittwoch, 28. Juli 2010 10:15 An: [email protected] Cc: [email protected]; [email protected] Betreff: Re: AW: [Samba] Multiple Workgroups and Subnets OK, but what of the client PC's in Group2. Do I assign them the Group1 server as their WINS server, or do they now operate without WINS? Tawanda Daniel Müller wrote: > Example > On Server1 > > [global] > >> workgroup = GROUP1 >> netbios name = GROUP1_SRV >> domain master = yes >> local master = yes >> preferred master = yes >> os level = 65 >> smb ports = 139 >> dns proxy = no >> socket options = TCP_NODELAY SO_RCVBUF=8192 >> SO_SNDBUF=8192 >> wins support = yes >> name resolve order = wins lmhosts bcast host >> interfaces = lo eth0 192.168.10.254/24 127.0.0.1/8 >> bind interfaces only = yes >> remote announce = 192.168.20.254/GROUP1 >> remote browse sync = 192.168.20.254 >> hosts allow = 127. 192.168.10. 192.168.20. >> > > > On Server 2 > > > [global] > >> workgroup = GROUP2 >> netbios name = GROUP2_SRV >> domain master = yes >> local master = yes >> preferred master = yes >> os level = 65 >> smb ports = 139 >> dns proxy = no >> socket options = TCP_NODELAY SO_RCVBUF=8192 >> SO_SNDBUF=8192 >> wins support = no >> > ---------> Wins server= IPOFTHESERVER1 <----------- > >> name resolve order = wins lmhosts bcast host >> interfaces = lo eth0 192.168.10.254/24 127.0.0.1/8 >> bind interfaces only = yes >> remote announce = 192.168.10.254/GROUP2 >> remote browse sync = 192.168.10.254 >> hosts allow = 127. 192.168.10. 192.168.20. >> > > > ----------------------------------------------- > EDV Daniel Müller > > Leitung EDV > Tropenklinik Paul-Lechler-Krankenhaus > Paul-Lechler-Str. 24 > 72076 Tübingen > > Tel.: 07071/206-463, Fax: 07071/206-499 > eMail: [email protected] > Internet: www.tropenklinik.de > ----------------------------------------------- > -----Ursprüngliche Nachricht----- > Von: [email protected] [mailto:[email protected]] Im > Auftrag von [email protected] > Gesendet: Dienstag, 27. Juli 2010 23:27 > An: Tawanda Kavayi > Cc: [email protected] > Betreff: Re: [Samba] Multiple Workgroups and Subnets > > Short answer: Use 1 WINS server. > > > > >> --- Original message --- >> Subject: [Samba] Multiple Workgroups and Subnets >> From: Tawanda Kavayi <[email protected]> >> To: <[email protected]> >> Date: Tuesday, 27/07/2010 2:01 PM >> >> Hi, >> >> I am configuring a network with two subnets with a different workgroup >> in each subnet. My aim is to have users being able to view and access >> shares on both workgroups. I have a Samba server in each >> subnet/workgroup, configured as both the domain and local master for >> each workgroup. Each server is also the WINS server for its subnet. >> The >> setup is like this: >> >> Subnet1: >> network - 192.168.10.0/24 >> server IP - 192.168.10.254 >> workgroup - Group1 >> >> Subnet2: >> network - 192.168.20.0/24 >> server IP - 192.168.20.254 >> workgroup - Group2 >> >> The two servers are configured identically, except for the information >> above, so the smb.conf for the Group1 server looks like this: >> >> [global] >> workgroup = GROUP1 >> netbios name = GROUP1_SRV >> domain master = yes >> local master = yes >> preferred master = yes >> os level = 65 >> smb ports = 139 >> dns proxy = no >> socket options = TCP_NODELAY SO_RCVBUF=8192 >> SO_SNDBUF=8192 >> wins support = yes >> name resolve order = wins lmhosts bcast host >> interfaces = lo eth0 192.168.10.254/24 127.0.0.1/8 >> bind interfaces only = yes >> remote announce = 192.168.20.254/GROUP1 >> remote browse sync = 192.168.20.254 >> hosts allow = 127. 192.168.10. 192.168.20. >> >> The problem is that a machine in Group1 can see all the machines in >> it's >> workgoup, plus the network for Group2 appears in network neighborhood, >> but the machines and shares in Group2 do not. >> >> To troubleshoot, I ran smbtree with debug level 5. What I picked out >> from all the output was: >> >> Cannot find master browser for workgroup GROUP2 >> >> How can I resolve this? >> >> >> Tawanda >> >> >> -- >> To unsubscribe from this list go to the following URL and read the >> instructions: https://lists.samba.org/mailman/options/samba >> > > -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
