On Sat, Feb 19, 2011 at 11:15 AM, Leonardo Carneiro <[email protected]>wrote:
> On Sat, Feb 12, 2011 at 12:51 PM, Leonardo Carneiro < > [email protected]> wrote: > >> > >> > Do you have the log level set at at least 3? >> > >> > John >> > >> >> It was set to 2 (3 for winbind), but i setted for 3 and did some >> testes. again, nothing interesting. setted to 5 and at least something >> related to the machine name showed up on nmbd.log: >> >> >> [2011/02/12 12:43:48.071897, 4] >> nmbd/nmbd_workgroupdb.c:281(dump_workgroups) >> dump_workgroups() >> dump workgroup on subnet 192.168.0.2: netmask= 255.255.254.0: >> DOMINIO(1) current master browser = DOMAINSERVER >> ... (some machines) >> VELTEC16 40011003 () (the machine that i'm testing) >> ... (some others machines) >> other than this... nothing. >> > > Hi guys. I had to give a break to the samba debug cause my ldap base went > crazy for a while after the upgrade, but it's ok now. > > Unfortunally, my samba PDC still isn't going quite well =( > > There is any other ideas that i could try? Before all this, eventually one > or two machines had trust relationship issues, but all i need to do was > re-adding them to the domain. Now i can't even do this, since when i try to > add a machine is the domain, the Workstation service just crashes. =S > One thing i notice is that i cannot see my domain box when i navigate through the network, but if i go direct to the IP of the server i can see the shares and stuff. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
