2011/5/11 TAKAHASHI Motonobu <[email protected]>: > From: Arno Steffen <[email protected]> > Date: Wed, 11 May 2011 16:01:44 +0200 > >> > On 05/11/2011 05:36 AM, Arno Steffen wrote: >> >> >> >> Now calling smbclient gives me: >> >> >> >> init_iconv: Conversion from UTF-16LE to CP850 not supported >> >> init_iconv: Attempting to replace with conversion from UTF-16LE to ASCII >> >> init_iconv: Conversion from UTF-8 to CP850 not supported >> >> init_iconv: Attempting to replace with conversion from ASCII to ASCII >> >> init_iconv: Conversion from ANSI_X3.4-1968 to CP850 not supported >> >> >> >> What do I missed in installing or configuration? >> >> >> >> Best regards >> > >> > Have you considered building with static libraries (at least to get it >> > working)? On my small cross compiled target, I run configure with >> > --without-shared. However, I'm using an older branch (3.0). > > Have you installed CP437.so and CP850.so at > /usr/local/samba/lib/charset (by default) or linked statically? > > Or to set "dos charset = ASCII", you will avoid these errors. > >> I have a small embedded device, just want to access windows shares from >> there. > > Anyway if you use non-ASCII characters in filenames, not setting "dos > charset" property, you will have problems. > > --- > TAKAHASHI Motonobu <[email protected]> >
Thanks - cp the CP*.so files was helpful! I assume that I can do a make install into a NFS root (example /opt/rootfs) by using this --prefix=/opt/rootfs/usr/local/samba --exec-prefix=/opt/rootfs/usr/local/bin ?? But how can I configure the build process so, that it notices the facilities/libs/... of target system. I assume that it will with this: "./configure --host=arm-none-linux-gnueabi --build=i686" it is unknown during build/configure process which libraries or resources are available. Is the fact, that I have to set "export samba_cv_CC_NEGATIVE_ENUM_VALUES=0" in advance a bug in the configure script or can I avoid the stop of script in a other common way? Sorry if this are beginners questions for most of you. Regards Arno -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
