I have a konica printer (at IP 10.1.1.28 below) that is broken from samba
3.5.11 to 3.6.6 (in debian-derived Knoppix, from DVD 6.7.1 to DVD 7.0.4). The
printer is configured in the following command line sequence:
lpadmin -p konica -v smb://10.1.1.28/C552 -P
/usr/share/ppd/Driver-konica-C552/CUPS1.2/English/KOC652UX.ppd
cupsenable konica
cupsaccept konica
/etc/init.d/cups restart
In samba 3.6.6 (with cups 1.5.3), the printer is initially configured OK. The
first print job (via 'lp') however incurs an error (recorded in
/var/log/cups/error_log): Error writing spool:
NT_STATUS_INVALID_NETWORK_RESPONSE and the printing on the printer becomes
disabled thereafter (though the queuing remains enabled, as reported by 'lpc'
status).
Please advise on solutions to this problem. Thanks in advance.
This is an linux system: kernel 3.4.9-64 #32 SMP PREEMPT Fri Aug 17 03:19:19
CEST 2012, x86_64 GNU/Linux
Boryeu Mao
<html>
<font face="Century Gothic" color="red">
<b><u>Disclaimer</u></b></font><font face="Century Gothic">
This message, including any attachment, is intended for the use of the
individual or entity to which it is addressed.
It is therefore to be considered as a private correspondence which may contain
confidential information. If you are
not the intended recipient, please advise the sender immediately delete this
message and any attachment there to
without retaining a copy.
</font>
</html>
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
