Hi Jason I switched off all the locking. This seems to be a nice bypass !
The "panic" still occurs every now and then , but the user gets: "Word can not complete the save due to a file permission error". If I press OK and "retry" it saves the file without problem. On the Samba status page the "active connection" is gone, but I can go on working. Thanks a milion. David ----- Original Message ----- From: Jason C. Waters To: david de leeuw Sent: Thursday, July 24, 2003 8:42 PM Subject: Re: [Samba] active connection gets lost in samba version 3.0 beta 3 I would try this first. Get rid of any locking options in the shares and make sure the global definitions have all locking options set to no. Try that and see what happens. Good luck david de leeuw wrote: Hi Jason, With these parameters Word crashes as well, but the messages in the log are very different. Now I get "Transport endpoint is not connected" "write_socket_data: write failure. Error = Connection reset by peer" etc. See the log. David ---- Original Message ----- From: "Jason C. Waters" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, July 24, 2003 8:25 PM Subject: Re: [Samba] active connection gets lost in samba version 3.0 beta 3 Try adding these to your global configuration locking = no level2 oplocks = no -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
