This looks like you use cups, not lprng, so, I have no idea how much of what I said will apply.
Maybe you haven't the software from lexmark. Here is a part of what I see with: locate z53 /mnt/hda4/usr/local/lexmark/z53 /mnt/hda4/usr/local/lexmark/z53/A4.xpm /mnt/hda4/usr/local/lexmark/z53/A5.xpm /mnt/hda4/usr/local/lexmark/z53/A6_Card.xpm /mnt/hda4/usr/local/lexmark/z53/align.xpm /mnt/hda4/usr/local/lexmark/z53/alignz53 /mnt/hda4/usr/local/lexmark/z53/B5.xpm /mnt/hda4/usr/local/lexmark/z53/Banner.xpm etc. etc. By point to I mean the "if" (input filter) paramter in /etc/printcap, which refers to the file z53.sh if you are using the lexmark supplied drivers. Joel On Thu, Jul 24, 2003 at 08:47:18PM -0700, Jim C wrote: > > > > > >OK. Here is what works for me. As usual, your mileage may vary. > >I assume you have installed the software for the lexmarkz53 on your > >linux server. I assume you can print a test page. If you can't, likely > >you are not printing the testpage to a raw queue. The testpage goes to a > >raw queue while the real print jobs go to a filtered queue, in my setup. > >I assume you know how to run the lexmark setup program which generates the > >configuration file. > > > >lexmark supplies print filters that work fine in linux to drive the z53. > >I wrote a tutorial on print filters some time ago. I used this filter > >as part of that writeup. Here is part of that tutorial. > >============Start Tutorial===================== > >There is a shell script called z53.sh. This is what your printcap file > >should be pointing to. > > > I'm not sure I know what you mean by "points to". > > [EMAIL PROTECTED] z53]# man printcap > No manual entry for printcap > [EMAIL PROTECTED] z53]# man -k printcap > printcap: nothing appropriate > > /etc/printcap says: > # This file was automatically generated by cupsd(8) from the > # /etc/cups/printers.conf file. All changes to this file > # will be lost. > LexmarkZ53|LexmarkZ53:rm=enigma.microverse.net:rp=LexmarkZ53: > > [EMAIL PROTECTED] z53]# locate LexmarkZ53 > /etc/cups/ppd/LexmarkZ53.ppd > /etc/foomatic/LexmarkZ53.ppd > /var/cache/samba3.BAK/samba3/printing/LexmarkZ53.tdb > /var/cache/samba3/printing/LexmarkZ53.tdb > /home/jcolling/.openoffice/user/psprint/driver/LexmarkZ53.PPD > > > -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
