You need to use the wb_group squid external_acl helper. Check the Squid FAQ and Squid message archives for details.
Jay > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > Ian Clancy > Sent: Wednesday, 30 July 2003 8:19 PM > To: '[EMAIL PROTECTED]' > Subject: [Samba] Using Winbind with Squid > > > Hello, > I've configured a squid proxy server to use the wb_auth module to > authenticate NT Users . I'm aware that this is not the squid users mailing > list but since the wb_auth modle uses the winbind application i > thought this > might be a good place to look for some help. > Basically, the wb_auth module asks winbind to authenticate a > users. Winbind > then returns a '0' if the authentication was successful, or a '1' if the > authentication was unsuccessful. This is working perfectly except for one > problem. I want to be able to authenticate only specified users or groups. > At the moment every domain user is able to use the proxy server. > Can anyone > think of a way to get winbind to only authenticate members of an 'Internet > Users' group ?. > > Has anyone any previous experience of the setup ? > All help much appreciated. > Ian > > > Legal Disclaimer: Any views expressed by the sender of this message are > not necessarily those of Connaught Electronics Ltd. Information in this > e-mail may be confidential and is for the use of the intended recipient > only, no mistake in transmission is intended to waive or compromise such > privilege. Please advise the sender if you receive this e-mail by mistake. > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba > > -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
