Hello Bryan.
I used the same RPMs, and had the same error initially. If you change your
printcap name = /etc/printcap
I think you will find that error go away.
TTyL
From: Bryan White <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: [Samba] CUPS printing on Fedora with 3.0.2 RPMs Date: Tue, 10 Feb 2004 08:58:34 -0500
I have upgraded my Fedora Core 1 file server from the distribution supplied 3.0.0 RPMS to the Fedora/Samba 3.0.2 RPMS I found on the Samba Web Site.
After doing this, printers are not be recognized or shared.
When I restarted the server this message showed up in /var/log/samba/log.smbd:
[2004/02/09 18:00:04, 0] printing/pcap.c:pcap_printer_fn(361)
Unable to open printcap file cups for read!
My /etc/samba/smb.conf file has this in the [global] section: printing = cups printcap name = cups load printers = yes
And it has this for a [printers] section: [printers] path = /var/spool/samba guest ok = yes printable = yes use client driver = yes
My /etc/printcap file is mode 644 and contains: # This file was automatically generated by cupsd(8) from the # /etc/cups/printers.conf file. All changes to this file # will be lost. lpcube1|Cubeland community printer:rm=fs.arcamax.com:rp=lpcube1: lpship1|lpship1:rm=fs.arcamax.com:rp=lpship1:
This was all working before the upgrade.
Ideas?
-- Bryan White, ArcaMax Inc.
Who approaches the Bridge of Death Must answer me these questions three Ere the other side he see.
-- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
_________________________________________________________________
Check out the great features of the new MSN 9 Dial-up, with the MSN Dial-up Accelerator. http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/
-- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
