[Samba] 2nd printer won't print

Gregory W. Eckrich Mon, 08 Mar 2004 09:46:17 -0800

Good morning,

I would appreciate some help. SAMBA is new turf. I am working out of a John Blair Book SAMBA: Integrating UNIX and Windows 1998

PROBLEM: unable to print to the 2nd of two printers on a samba host. ENVIRONMENT: -4 systems in a home network; connected to an HP hub (10 meg) -3 systems run Red Hat linux 9.0 (system names: snoopy, white, olblue) -4th system runs Windows 2000 Professional (system name: bigred) -SAMBA server Snoopy has two directly attached printers, an HP 4L (old laser) on LPT1 and an HP OfficeJet T45 on LPT2 Snoopy: 384 MEG RAM; celeron 400 Mhz SAMBA: ver 2.2.7a -On red: (Win2K) if a print job is sent to the HP_4L, it prints cleanly; if a print job is sent to the T45, it does not print Red: COMPAQ Deskpro 64 MEG RAM; Pentium 200 Mhz -On red: if one clicks start, run and types " \\snoopy", all shares on snoopy are seen, including the two printers [Win2K troubleshooting says that this demonstrates a "basic" connection] -On red: T45, upon being opened, reports in the title window: "T45 on snoopy, Access denied unable to connect" HP_4L initializes and then is available to print and does print CONDITIONS on Snoopy: -Both printers print correctly; various softwares see both printers

DIAGNOSTICS:
[EMAIL PROTECTED] greg]# smbclient -L snoopy -U '' -N
added interface ip=10.10.10.1 bcast=10.10.10.255 nmask=255.255.255.0
Domain=[CIRRUS] OS=[Unix] Server=[Samba 2.2.7a]

       Sharename      Type      Comment
       ---------      ----      -------
       etc            Disk      snoopy_etc
       C              Disk      snoopy_C
       win2k          Disk      snoopy_D
       ls120          Disk      snoopy_A
       printca        Disk      access printers
       IPC$           IPC       IPC Service (samba server)
       ADMIN$         Disk      IPC Service (samba server)
       HP_4L          Printer
       T45            Printer

       Server               Comment
       ---------            -------
       RED
       SNOOPY               samba server

Workgroup Master --------- ------- CIRRUS SNOOPY ==================================== [EMAIL PROTECTED] /]# testparm /etc/samba/smb.conf Load smb config files from /etc/samba/smb.conf Processing section "[homes]" Processing section "[printers]" Processing section "[etc]" Processing section "[C]" Processing section "[win2k]" Processing section "[ls120]" Processing section "[printca]" Loaded services file OK. ==================================== [EMAIL PROTECTED] /]# smbclient '\\snoopy\tmp' added interface ip=10.10.10.1 bcast=10.10.10.255 nmask=255.255.255.0 Password: Anonymous login successful Domain=[CIRRUS] OS=[Unix] Server=[Samba 2.2.7a] tree connect failed: NT_STATUS_BAD_NETWORK_NAME <-------What's he telling me? =====================================

--
To unsubscribe from this list go to the following URL and read the
instructions:  http://lists.samba.org/mailman/listinfo/samba

[Samba] 2nd printer won't print

Reply via email to