I'm hoping someone can give me a hand in figuring out this problem, I have seen several other similar problems in searching, but nothing that exactly matches what I am seeing here.
I have recently migrated a client from a Samba server running 2.2.7 (Redhat 9) to 3.0.2 (Fedora 1). The samba installation is running as a PDC for 5 Win XP workstations and was working perfectly prior to the upgrade. When I did the migration I copied the entire contents of the /etc/samba directory across to the new machine (no changes at all). Now that I have done the migration I *CAN* still do the following... - log in to the domain - the user's roaming profiles transfer successfully back and forth to the server - existing mapped drives on the workstations (to shares on the server) work as they always have - can map new shares to the server with no problem But, the following items no longer work... - In XP if I go to entire network and try to view the computers in the domain, only the server shows up... none of the 5 workstations show up in the domain as previously. - Can no longer access printers shared on the workstations - If I try to enter \\workstation1\data (or any of the valid, pre-existing, previously working shares on any of the workstations) from any of the 5 workstations, either via start | run, or via the address bar in My Computer I get an error that states "Trust relationship between this workstation and primary domain failed". So, to summarize, all of the workstations see the server just fine but the workstations don't seem to be able to see eachother or their shared resources any longer and complain about the trust problem. Prior to copying the contents of /etc/samba to the new server I did a comparison between the distributed smb.conf file and the old file. I did not see any added or removed keys so I chose to save typing and just use the existing file. The following are the files which I copied over... smb.conf, smbusers, lmhosts, secrets.tdb and smbpasswd. I assumed by doing this that any possible required configuration would get transferred across to the new machine. I have done an in-place upgrade from RH9 to FC1 on another server (rather than doing a clean install and transferrig the configs) and the samba install there worked just fine (also with making no changes from the existing configs), so I'm really lost as to what could be causing this issue. Any hints, tips or suggestions are appreciated. Thanks, >>>>> Mike <<<<< -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
