Re: [Samba] Can't get SWAT to work...

[Paul Gienger]

Unless you're sitting at the console of the machine and specifying 
http://localhost:901 you want to take out the only_from line in your 
config file.  You will not see it in your process list.  Make sure you 
restart or HUP your xinetd.

Brad wrote:

I have a Red Hat 9 file server and I have been unable to use swat to 
configure the smb.conf file.

I have samba-swat installed and the following in /etc/xintetd:

=================================================================
# default: off
# description: SWAT is the Samba Web Admin Tool. Use swat \
#              to configure your Samba server. To use SWAT, \
#              connect to port 901 with your favorite web browser.
service swat
{
        disable         = no
        port            = 901
        socket_type     = stream
        wait            = no
        only_from       = 127.0.0.1
        user            = root
        server          = /usr/sbin/swat
        log_on_failure  += USERID
=================================================================
I have restarted xinetd.

Should I be able to see swat in the process list?

# ps ax|grep swat
24560 pts/1    S      0:00 grep swat
When I go to a browser and go to:

http://<serverip>:901

nothing happens at all. It just sits there. There is nothing in 
/var/log/messages or /var/log/messages/samba/*

Can anyone shed any light on this?

Regards,
Brad


--
Paul Gienger                     Office:                701-281-1884
Applied Engineering Inc.         Cell:                  701-306-6254
Information Systems Consultant   Fax:                   701-281-1322
URL: www.ae-solutions.com        mailto:[EMAIL PROTECTED]
--
To unsubscribe from this list go to the following URL and read the
instructions:  http://lists.samba.org/mailman/listinfo/samba