You might try making sure that nmbd is not in /etc/inetd.conf if you haven't already.
---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | | Ryan Novosielski - Jr. UNIX Systems Admin |$&| |__| | | |__/ | \| _| | [EMAIL PROTECTED] - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent. | IST/ACS - NJMS Medical Science Bldg - C630 On Thu, 6 May 2004, Rainer Koslowski wrote: > Hello! > > I have cross-compiled Samba 2.2.3a for my Dreambox(PPC > DVB receiver with Linux). > smbd runs without any problems but when I start nmbd I > get the following error message: > -------------------------------------------- > standard input is not a socket, assuming -D option > open_socket_in(): setsockopt: SO_REUSEADDR = True on > port 137 failed with error = Protocol not available > Failed to set socket option SO_BROADCAST (Error > Protocol not available) > Failed to set socket option SO_BROADCAST (Error > Protocol not available) > open_socket_in(): setsockopt: SO_REUSEADDR = True on > port 137 failed with error = Protocol not available > bind failed on port 137 socket_addr = 192.168.0.100. > Error = Address already in use > nmbd_subnetdb:make_subnet() > Failed to open nmb socket on interface 192.168.0.100 > for port 137. Error was Address already in use > ERROR: Failed when creating subnet lists. Exiting. > -------------------------------------------- > > Port 137 is definitely not in use. (checked with > netstat) > I have also checked other Samba versions, although I > couldn't cross-compile all files: Same problem. > > There is something said about broadcast. This should > also be configured right: > -------------------------------------------- > eth0 Link encap:Ethernet HWaddr > 00:09:34:00:9E:B9 > inet addr:192.168.0.100 Bcast:192.168.0.255 > Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 > Metric:1 > RX packets:4774 errors:0 dropped:0 > overruns:0 frame:0 > TX packets:918 errors:0 dropped:0 overruns:0 > carrier:0 > collisions:0 txqueuelen:100 > RX bytes:730422 (713.3 KiB) TX bytes:0 (0.0 > B) > Interrupt:28 Base address:0x300 > -------------------------------------------- > > I hope anyone can find my mistake in the log. > > Thanks in advance! > > > > > > > Mit sch�nen Gr��en von Yahoo! Mail - http://mail.yahoo.de > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba > -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
