At first: Thanks for the response. Here are the performance Measures of my Harddisks in the Server. As the Harddisks are not connected to the Onboard IDE, they're not limited to 9 MB/sec
/dev/sda is the SCSI HDD where Redhat 9.0 is installed on. /dev/sdb is the RAID 0, Connected to the PCI Raid Controller Card. The only Share Samba provides is on the RAID, so performance should be enough. [EMAIL PROTECTED] /]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 64 MB in 5.42 seconds = 11.81 MB/sec [EMAIL PROTECTED] /]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 64 MB in 1.55 seconds = 41.29 MB/sec ----- Original Message ----- From: "Dimitar Vassilev" <[EMAIL PROTECTED]> To: "Holger Krull" <[EMAIL PROTECTED]> Cc: "Steffen Timmermann" <[EMAIL PROTECTED]>; "Sambaliste" <[EMAIL PROTECTED]> Sent: Tuesday, October 12, 2004 7:40 PM Subject: Re: [Samba] Performance Issues with GBit LAN > В отговор на Holger Krull <[EMAIL PROTECTED]>: > Please post your socket options. Where do i find them? > Disable computer browser from Control panel -> Administrative Tools->Services Wasn't disabled...done > Enable Netbios over TCP Wasn't enabled....done > set SO_RCVBUF and SO_SNDBUF to a value higher than 16386 How do I set the Buffersizes and on which machine? > set dir caching. Where do i set this? > Get clients gigabit NICs The Server and the Client both have the same GBit NIC with 8169 chipset. > Best regards, > Dimitar Vassilev -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
