Every time I try to add a pc to the domain I get the response that it is an un-recognized user name. I have followed the instructions located here:
http://samba.idealx.org/smbldap-howto.en.html and am setting it up on a copy of Fedora Core 4 using the default installed packages and versions. I am also unable to complete step 4.5 in the guide to test out the setup because it gives me the following error: [EMAIL PROTECTED] namedb]# ssh [EMAIL PROTECTED] [EMAIL PROTECTED]'s password: Permission denied, please try again. [EMAIL PROTECTED] password: Permission denied, please try again. [EMAIL PROTECTED]'s password: Permission denied (publickey,gssapi-with-mic,password). I have made sure that the user directory does in fact exist and has permissions on it because I know that ssh can fail if there is no user directory. I have pasted in my configuration files as well. I am only working on it in a test environment so I don't care about any passwords that may appear. I have included all the configuration files for Samba, Ldap, Nss, System Auth, and the DNS information. Following that will be some of the log entries. I hope this should provide enough information as to what is going on so I can get the most help possible. And thanks for any help that people can provide into this. ====== NAMED.CONF ========= // // named.conf for Red Hat caching-nameserver // options { directory "/etc/namedb"; dump-file "/var/cache_dump.db"; statistics-file "/var/run/named.stats"; pid-file "/var/run/named.pid"; allow-query { 10.0.0.0/24; localhost; }; allow-recursion { 10.0.0.0/24; localhost; }; /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; }; // // a caching only nameserver config // controls { inet 127.0.0.1 allow { localhost; } keys { rndckey; }; }; zone "0.0.127.in-addr.arpa" { type master; file "pz/127.0.0"; }; zone "mtgmilw.biz" { type master; notify no; file "pz/mtgmilw.biz"; allow-query { any; }; }; zone "0.0.10.in-addr.arpa" { type master; notify no; file "pz/10.0.0"; allow-query { any; }; }; include "/etc/rndc.key"; ============================ ===== 10.0.0 ================= $TTL 3D @ IN SOA ns.mtgmilw.biz. hostmaster.mtgmilw.biz. ( 200506192 ; Serial, todays date + todays serial 8H ; Refresh 2H ; Retry 4W ; Expire 1D ) ; Minimum TTL NS ns.mtgmilw.biz 1 PTR gw.mtgmilw.biz. 2 PTR ns.mtgmilw.biz. 3 PTR ftp.mtgmilw.biz. 4 PTR pdc-srv.mtgmilw.biz. ================================ ==========127.0.0================ $TTL 3D @ IN SOA ns.mtgmilw.biz. hostmaster.mtgmilw.biz. ( 1 ; Serial 8H ; Refresh 2H ; Retry 4W ; Expire 1D) ; Minimum TTL NS ns.mtgmilw.biz. 1 PTR localhost. ============================== ==========mtgmilw.biz============ ; ; Zone file for mtgmilw.biz ; ; the full zone file ; $TTL 3D @ IN SOA ns.mtgmilw.biz. hostmaster.mtgmilw.biz. ( 200506191 ; serial, todays date + todays serial # 8H ; refresh, seconds 2H ; retry, seconds 4W ; expire, seconds 1D ) ; minimum, seconds ; NS ns ; Inet Address of name server ; localhost A 127.0.0.1 ; gw A 10.0.0.1 TXT "The router" ; ns A 10.0.0.75 www CNAME ns ; ftp A 10.0.0.75 ; pdc-srv A 10.0.0.75 TXT "Domain Controller" ============================= =========SYSTEM-AUTH======== #%PAM-1.0 # This file is auto-generated. # User changes will be destroyed the next time authconfig is run. auth required /lib/security/$ISA/pam_env.so auth sufficient /lib/security/$ISA/pam_unix.so likeauth nullok auth sufficient /lib/security/$ISA/pam_ldap.so use_first_pass auth required /lib/security/$ISA/pam_deny.so account required /lib/security/$ISA/pam_unix.so broken_shadow account sufficient /lib/security/$ISA/pam_succeed_if.so uid < 100 quiet account [default=bad success=ok user_unknown=ignore] /lib/security/$ISA/pam_ldap.so account required /lib/security/$ISA/pam_permit.so password requisite /lib/security/$ISA/pam_cracklib.so retry=3 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok md5 shadow password sufficient /lib/security/$ISA/pam_ldap.so use_authtok password required /lib/security/$ISA/pam_deny.so session required /lib/security/$ISA/pam_limits.so session required /lib/security/$ISA/pam_unix.so session optional /lib/security/$ISA/pam_ldap.so =================================== ==========NSSWITCH.CONF=========== # # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: files ldap shadow: files ldap group: files ldap #hosts: db files nisplus nis dns hosts: files dns # Example - obey only what nisplus tells us... #services: nisplus [NOTFOUND=return] files #networks: nisplus [NOTFOUND=return] files #protocols: nisplus [NOTFOUND=return] files #rpc: nisplus [NOTFOUND=return] files #ethers: nisplus [NOTFOUND=return] files #netmasks: nisplus [NOTFOUND=return] files bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files ldap rpc: files services: files ldap netgroup: files ldap publickey: nisplus automount: files ldap aliases: files nisplus ============================== ========= SLAPD.CONF ========= # # See slapd.conf(5) for details on configuration options. # This file should NOT be world readable. # include /etc/openldap/schema/core.schema include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/inetorgperson.schema include /etc/openldap/schema/nis.schema include /etc/openldap/schema/samba.schema # Allow LDAPv2 client connections. This is NOT the default. #allow bind_v2 # Do not enable referrals until AFTER you have a working directory # service AND an understanding of referrals. #referral ldap://root.openldap.org pidfile /var/run/slapd.pid argsfile /var/run/slapd.args # Load dynamic backend modules: #modulepath /usr/sbin/openldap #moduleload back_bdb.la #moduleload back_ldap.la #moduleload back_ldbm.la #moduleload back_passwd.la #moduleload back_shell.la # The next three lines allow use of TLS for encrypting connections using a # dummy test certificate which you can generate by changing to # /usr/share/ssl/certs, running "make slapd.pem", and fixing permissions on # slapd.pem so that the ldap user or group can read it. Your client software # may balk at self-signed certificates, however. # TLSCACertificateFile /usr/share/ssl/certs/ca-bundle.crt # TLSCertificateFile /usr/share/ssl/certs/slapd.pem # TLSCertificateKeyFile /usr/share/ssl/certs/slapd.pem # Sample security restrictions # Require integrity protection (prevent hijacking) # Require 112-bit (3DES or better) encryption for updates # Require 63-bit encryption for simple bind # security ssf=1 update_ssf=112 simple_bind=64 # Sample access control policy: # Root DSE: allow anyone to read it # Subschema (sub)entry DSE: allow anyone to read it # Other DSEs: # Allow self write access # Allow authenticated users read access # Allow anonymous users to authenticate # Directives needed to implement policy: # access to dn.base="" by * read # access to dn.base="cn=Subschema" by * read # access to * # by self write # by users read # by anonymous auth # # if no access controls are present, the default policy # allows anyone and everyone to read anything but restricts # updates to rootdn. (e.g., "access to * by * read") # # rootdn can always read and write EVERYTHING! ####################################################################### # ldbm and/or bdb database definitions ####################################################################### database bdb directory /var/lib/ldap suffix dc=mtgmilw,dc=biz rootdn "cn=Manager,dc=mtgmilw,dc=biz" # Cleartext passwords, especially for the rootdn, should # be avoided. See slappasswd(8) and slapd.conf(5) for details. # Use of strong authentication encouraged. # rootpw secret # rootpw {crypt}ijFYNcSNctBYg rootpw {MD5}z6esruJ0bazhCUSsbfqPnw== # The database directory MUST exist prior to running slapd AND # should only be accessible by the slapd and slap tools. # Mode 700 recommended. # Indices to maintain for this database index objectClass,uidNumber,gidNumber eq index cn,sn,uid,displayName pres,sub,eq index memberUid,mail,givenname eq,subinitial index sambaSID,sambaPrimaryGroupSID,sambaDomainName eq # Replicas of this database #replogfile /var/lib/ldap/openldap-master-replog #replica host=ldap-1.example.com:389 starttls=critical # bindmethod=sasl saslmech=GSSAPI # authcId=host/[EMAIL PROTECTED] # users can authenticate and change their password access to attrs=userPassword,sambaNTPassword,sambaLMPassword,sambaPwdLastSet,sambaPwdMustChange by dn="cn=samba,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=nssldap,ou=DSA,dc=mtgmilw,dc=biz" write by self write by anonymous auth by * none # some attributes need to be readable anonymously so that 'id user' can answer correctly access to attrs=objectClass,entry,homeDirectory,uid,uidNumber,gidNumber,memberUid by dn="cn=samba,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz" write by * read # somme attributes can be writable by users themselves access to attrs=description,telephoneNumber,roomNumber,homePhone,loginShell,gecos,cn,sn,givenname by dn="cn=samba,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz" write by self write by * read # some attributes need to be writable for samba access to attrs=cn,sambaLMPassword,sambaNTPassword,sambaPwdLastSet,sambaLogonTime,sambaLogoffTime,sambaKickoffTime,sambaPwdCanChange,sambaPwdMustChange,sambaAcctFlags,displayName,sambaHomePath,sambaHomeDrive,sambaLogonScript,sambaProfilePath,description,sambaUserWorkstations,sambaPrimaryGroupSID,sambaDomainName,sambaMungedDial,sambaBadPasswordCount,sambaBadPasswordTime,sambaPasswordHistory,sambaLogonHours,sambaSID,sambaSIDList,sambaTrustFlags,sambaGroupType,sambaNextRid,sambaNextGroupRid,sambaNextUserRid,sambaAlgorithmicRidBase,sambaShareName,sambaOptionName,sambaBoolOption,sambaIntegerOption,sambaStringOption,sambaStringListoption by dn="cn=samba,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz" write by self read by * none # samba need to be able to create the samba domain account access to dn.base="dc=mtgmilw,dc=biz" by dn="cn=samba,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz" write by * none # samba need to be able to create new users account access to dn="ou=Users,dc=mtgmilw,dc=biz" by dn="cn=samba,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz" write by * none # samba need to be able to create new groups account access to dn="ou=Groups,dc=mtgmilw,dc=biz" by dn="cn=samba,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz" write by * none # samba need to be able to create new computers account access to dn="ou=Computers,dc=mtgmilw,dc=biz" by dn="cn=samba,ou=DSA,dc=mtgmilw,dc=biz" write by dn="cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz" write by * none # this can be omitted but we leave it: there could be other branch # in the directory access to * by self read by * none ========================== ========LDAP.CONF========= # @(#)$Id: ldap.conf,v 1.34 2004/09/16 23:32:02 lukeh Exp $ # # This is the configuration file for the LDAP nameservice # switch library and the LDAP PAM module. # # PADL Software # http://www.padl.com # # Your LDAP server. Must be resolvable without using LDAP. # Multiple hosts may be specified, each separated by a # space. How long nss_ldap takes to failover depends on # whether your LDAP client library supports configurable # network or connect timeouts (see bind_timelimit). #host 10.0.0.75 # The distinguished name of the search base. base dc=mtgmilw,dc=biz # Another way to specify your LDAP server is to provide an # uri with the server name. This allows to use # Unix Domain Sockets to connect to a local LDAP Server. uri ldap://127.0.0.1/ #uri ldaps://127.0.0.1/ #uri ldapi://%2fvar%2frun%2fldapi_sock/ # Note: %2f encodes the '/' used as directory separator # The LDAP version to use (defaults to 3 # if supported by client library) #ldap_version 3 # The distinguished name to bind to the server with. # Optional: default is to bind anonymously. #binddn cn=proxyuser,dc=example,dc=com # The credentials to bind with. # Optional: default is no credential. #bindpw secret # The distinguished name to bind to the server with # if the effective user ID is root. Password is # stored in /etc/ldap.secret (mode 600) rootbinddn cn=nssldap,ou=DSA,dc=mtgmilw,dc=biz # The port. # Optional: default is 389. #port 389 # The search scope. #scope sub #scope one #scope base # Search timelimit #timelimit 30 # Bind/connect timelimit #bind_timelimit 30 # Reconnect policy: hard (default) will retry connecting to # the software with exponential backoff, soft will fail # immediately. #bind_policy hard # Idle timelimit; client will close connections # (nss_ldap only) if the server has not been contacted # for the number of seconds specified below. #idle_timelimit 3600 # Filter to AND with uid=%s #pam_filter objectclass=account # The user ID attribute (defaults to uid) #pam_login_attribute uid # Search the root DSE for the password policy (works # with Netscape Directory Server) #pam_lookup_policy yes # Check the 'host' attribute for access control # Default is no; if set to yes, and user has no # value for the host attribute, and pam_ldap is # configured for account management (authorization) # then the user will not be allowed to login. #pam_check_host_attr yes # Check the 'authorizedService' attribute for access # control # Default is no; if set to yes, and the user has no # value for the authorizedService attribute, and # pam_ldap is configured for account management # (authorization) then the user will not be allowed # to login. #pam_check_service_attr yes # Group to enforce membership of #pam_groupdn cn=PAM,ou=Groups,dc=example,dc=com # Group member attribute #pam_member_attribute uniquemember # Specify a minium or maximum UID number allowed #pam_min_uid 0 #pam_max_uid 0 # Template login attribute, default template user # (can be overriden by value of former attribute # in user's entry) #pam_login_attribute userPrincipalName #pam_template_login_attribute uid #pam_template_login nobody # HEADS UP: the pam_crypt, pam_nds_passwd, # and pam_ad_passwd options are no # longer supported. # # If you are using XAD, you can set pam_password # to racf, ad, or exop. Make sure that you have # SSL enabled. # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. #pam_password clear # Hash password locally; required for University of # Michigan LDAP server, and works with Netscape # Directory Server if you're using the UNIX-Crypt # hash mechanism and not using the NT Synchronization # service. #pam_password crypt # Remove old password first, then update in # cleartext. Necessary for use with Novell # Directory Services (NDS) #pam_password nds # RACF is an alias for the above. For use with # IBM RACF #pam_password racf # Update Active Directory password, by # creating Unicode password and updating # unicodePwd attribute. #pam_password ad # Use the OpenLDAP password change # extended operation to update the password. #pam_password exop # Redirect users to a URL or somesuch on password # changes. #pam_password_prohibit_message Please visit http://internal to change your password. # RFC2307bis naming contexts # Syntax: # nss_base_XXX base?scope?filter # where scope is {base,one,sub} # and filter is a filter to be &'d with the # default filter. # You can omit the suffix eg: # nss_base_passwd ou=People, # to append the default base DN but this # may incur a small performance impact. nss_base_passwd ou=Users,dc=mtgmilw,dc=biz?one nss_base_passwd ou=Computers,dc=mtgmilw,dc=biz?one nss_base_shadow ou=Users,dc=mtgmilw,dc=biz?one nss_base_group ou=Groups,dc=mtgmilw,dc=biz?one #nss_base_hosts ou=Hosts,dc=example,dc=com?one #nss_base_services ou=Services,dc=example,dc=com?one #nss_base_networks ou=Networks,dc=example,dc=com?one #nss_base_protocols ou=Protocols,dc=example,dc=com?one #nss_base_rpc ou=Rpc,dc=example,dc=com?one #nss_base_ethers ou=Ethers,dc=example,dc=com?one #nss_base_netmasks ou=Networks,dc=example,dc=com?ne #nss_base_bootparams ou=Ethers,dc=example,dc=com?one #nss_base_aliases ou=Aliases,dc=example,dc=com?one #nss_base_netgroup ou=Netgroup,dc=example,dc=com?one # attribute/objectclass mapping # Syntax: #nss_map_attribute rfc2307attribute mapped_attribute #nss_map_objectclass rfc2307objectclass mapped_objectclass # configure --enable-nds is no longer supported. # NDS mappings #nss_map_attribute uniqueMember member # Services for UNIX 3.5 mappings #nss_map_objectclass posixAccount User #nss_map_objectclass shadowAccount User #nss_map_attribute uid msSFU30Name #nss_map_attribute uniqueMember msSFU30PosixMember #nss_map_attribute userPassword msSFU30Password #nss_map_attribute homeDirectory msSFU30HomeDirectory #nss_map_attribute homeDirectory msSFUHomeDirectory #nss_map_objectclass posixGroup Group #pam_login_attribute msSFU30Name #pam_filter objectclass=User #pam_password ad # configure --enable-mssfu-schema is no longer supported. # Services for UNIX 2.0 mappings #nss_map_objectclass posixAccount User #nss_map_objectclass shadowAccount user #nss_map_attribute uid msSFUName #nss_map_attribute uniqueMember posixMember #nss_map_attribute userPassword msSFUPassword #nss_map_attribute homeDirectory msSFUHomeDirectory #nss_map_attribute shadowLastChange pwdLastSet #nss_map_objectclass posixGroup Group #nss_map_attribute cn msSFUName #pam_login_attribute msSFUName #pam_filter objectclass=User #pam_password ad # RFC 2307 (AD) mappings #nss_map_objectclass posixAccount user #nss_map_objectclass shadowAccount user #nss_map_attribute uid sAMAccountName #nss_map_attribute homeDirectory unixHomeDirectory #nss_map_attribute shadowLastChange pwdLastSet #nss_map_objectclass posixGroup group #nss_map_attribute uniqueMember member #pam_login_attribute sAMAccountName #pam_filter objectclass=User #pam_password ad # configure --enable-authpassword is no longer supported # AuthPassword mappings #nss_map_attribute userPassword authPassword # AIX SecureWay mappings #nss_map_objectclass posixAccount aixAccount #nss_base_passwd ou=aixaccount,?one #nss_map_attribute uid userName #nss_map_attribute gidNumber gid #nss_map_attribute uidNumber uid #nss_map_attribute userPassword passwordChar #nss_map_objectclass posixGroup aixAccessGroup #nss_base_group ou=aixgroup,?one #nss_map_attribute cn groupName #nss_map_attribute uniqueMember member #pam_login_attribute userName #pam_filter objectclass=aixAccount #pam_password clear # Netscape SDK LDAPS #ssl on # Netscape SDK SSL options #sslpath /etc/ssl/certs/cert7.db # OpenLDAP SSL mechanism # start_tls mechanism uses the normal LDAP port, LDAPS typically 636 #ssl start_tls #ssl on # OpenLDAP SSL options # Require and verify server certificate (yes/no) # Default is "no" #tls_checkpeer yes # CA certificates for server certificate verification # At least one of these are required if tls_checkpeer is "yes" #tls_cacertfile /etc/ssl/ca.cert #tls_cacertdir /etc/ssl/certs # Seed the PRNG if /dev/urandom is not provided #tls_randfile /var/run/egd-pool # SSL cipher suite # See man ciphers for syntax #tls_ciphers TLSv1 # Client certificate and key # Use these, if your server requires client authentication. #tls_cert #tls_key # Disable SASL security layers. This is needed for AD. #sasl_secprops maxssf=0 # Override the default Kerberos ticket cache location. #krb5_ccname FILE:/etc/.ldapcache # SASL mechanism for PAM authentication - use is experimental # at present and does not support password policy control #pam_sasl_mech DIGEST-MD5 ssl no #tls_cacertdir /etc/openldap/cacerts pam_password md5 tls_cacertdir /etc/openldap/cacerts #debug 256 #logdir /data/logs ========================= ===========SMB.CONF======= # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ===================================== [global] preserve case = yes obey pam restrictions = No enable privileges = yes delete user from group script = /usr/local/sbin/smbldap-groupmod -x "%u" "%g" time server = Yes show add printer wizard = yes nt acl support = No netbios name = PDC-SRV ldap passwd sync = Yes printing = cups logon script = logon.bat min passwd length = 8 dos charset = 850 workgroup = MTGMILW.BIZ os level = 33 ldap admin dn = cn=Manager,dc=mtgmilw,dc=biz printcap name = cups security = user short preserve case = yes add machine script = /usr/local/sbin/smbldap-useradd -w "%u" dont descend = /proc,/dev,/etc,/lib,/lost+found,/initrd max log size = 100000 log level = 5 log file = /var/log/samba/log.%m load printers = yes guest account = nobody ldap user suffix = ou=Users add group script = /usr/local/sbin/smbldap-groupadd -p "%g" socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 add user to group script = /usr/local/sbin/smbldap-groupmod -m "%u" "%g" mangling method = hash2 logon drive = H: deadtime = 10 create mask = 0640 domain master = yes username map = /etc/samba/smbusers interfaces = 10.0.0.75 map to guest = Bad User encrypt passwords = yes passdb backend = ldapsam:ldap://127.0.0.1/ logon home = printer admin = @"Print Operators" case sensitive = no wins support = yes ldap delete dn = Yes ldap machine suffix = ou=Computers ldap group suffix = ou=Groups server string = Samba Server %v ldap suffix = dc=mtgmilw,dc=biz logon path = add user script = /usr/local/sbin/smbldap-useradd -m "%u" directory mask = 0750 set primary group script = /usr/local/sbin/smbldap-usermod -g "%g" "%u" syslog = 0 ldap idmap suffix = ou=Users preferred master = Yes unix charset = ISO8859-1 domain logons = Yes ldap ssl = no [homes] comment = Home Directories browseable = no read only = No create mask = 0644 directory mask = 0775 # Un-comment the following and create the netlogon directory for Domain Logons [netlogon] ; comment = Network Logon Service path = /home/netlogon browseable = No read only = yes ; guest ok = yes ; writable = no ; share modes = no # Un-comment the following to provide a specific roving profile share # the default is to use the user's home directory [Profiles] path = /home/profiles browseable = no guest ok = yes read only = no create mask = 0600 directory mask = 0700 profile acls = yes csc policy = disable force user = %U valid users = %U @"Domain Admins" # NOTE: If you have a BSD-style print system there is no need to # specifically define each individual printer [printers] comment = Network Printers printer admin = @"Print Operators" path = /home/spool/ browseable = no # Set public = yes to allow user 'guest account' to print guest ok = yes writable = no printable = yes read only = yes print command = /usr/bin/lpr -P%p -r %s lpq command = /usr/bin/lpq -P%p lprm command = /usr/bin/lprm -P%p %j [print$] path = /home/printers guest ok = No browseable = yes read only = yes valid users = @"Print Operators" write list = @"Print Operators" create mask = 0664 directory mask = 0775 # This one is useful for people to share files ;[tmp] ; comment = Temporary file space ; path = /tmp ; read only = no ; public = yes [public] comment = Public Stuff path = /home/public browseable = yes guest ok = yes directory mask = 0775 create mask = 0664 read only = no ============================== ==========SMBLDAP-DSA.LDIFF====== dn: ou=DSA,dc=mtgmilw,dc=biz objectClass: top objectClass: organizationalUnit ou: DSA description: security accounts for LDAP clients dn: cn=samba,ou=DSA,dc=mtgmilw,dc=biz objectclass: organizationalRole objectClass: top objectClass: simpleSecurityObject userPassword: {MD5}z6esruJ0bazhCUSsbfqPnw== cn: samba dn: cn=nssldap,ou=DSA,dc=mtgmilw,dc=biz objectclass: organizationalRole objectClass: top objectClass: simpleSecurityObject userPassword: {MD5}z6esruJ0bazhCUSsbfqPnw== cn: nssldap dn: cn=smbldap-tools,ou=DSA,dc=mtgmilw,dc=biz objectclass: organizationalRole objectClass: top objectClass: simpleSecurityObject userPassword: {MD5}z6esruJ0bazhCUSsbfqPnw== cn: smbldap-tools ============================== ======LOGFILE-1============= [2005/06/21 16:31:08, 5] lib/util.c:show_msg(496) size=104 smb_com=0x25 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=136 smb_flg2=51201 smb_tid=1 smb_pid=1344 smb_uid=100 smb_mid=2240 smt_wct=10 smb_vwv[ 0]= 0 (0x0) smb_vwv[ 1]= 48 (0x30) smb_vwv[ 2]= 0 (0x0) smb_vwv[ 3]= 0 (0x0) smb_vwv[ 4]= 56 (0x38) smb_vwv[ 5]= 0 (0x0) smb_vwv[ 6]= 48 (0x30) smb_vwv[ 7]= 56 (0x38) smb_vwv[ 8]= 0 (0x0) smb_vwv[ 9]= 0 (0x0) smb_bcc=49 [2005/06/21 16:31:08, 3] smbd/process.c:process_smb(1091) Transaction 37 of length 45 [2005/06/21 16:31:08, 5] lib/util.c:show_msg(486) [2005/06/21 16:31:08, 5] lib/util.c:show_msg(496) size=41 smb_com=0x4 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=24 smb_flg2=51207 smb_tid=1 smb_pid=65279 smb_uid=100 smb_mid=2304 smt_wct=3 smb_vwv[ 0]=29784 (0x7458) smb_vwv[ 1]=65535 (0xFFFF) smb_vwv[ 2]=65535 (0xFFFF) smb_bcc=0 [2005/06/21 16:31:08, 3] smbd/process.c:switch_message(886) switch message SMBclose (pid 9027) conn 0x929eb58 [2005/06/21 16:31:08, 4] smbd/uid.c:change_to_user(194) change_to_user: Skipping user change - already user [2005/06/21 16:31:08, 4] rpc_server/srv_pipe_hnd.c:get_rpc_pipe(1168) search for pipe pnum=7458 [2005/06/21 16:31:08, 5] rpc_server/srv_pipe_hnd.c:get_rpc_pipe(1172) pipe name lsarpc pnum=7458 (pipes_open=1) [2005/06/21 16:31:08, 5] smbd/pipes.c:reply_pipe_close(260) reply_pipe_close: pnum:7458 [2005/06/21 16:31:08, 4] rpc_server/srv_pipe_hnd.c:close_rpc_pipe_hnd(1081) closed pipe name lsarpc pnum=7458 (pipes_open=0) [2005/06/21 16:31:08, 5] lib/util.c:show_msg(486) [2005/06/21 16:31:08, 5] lib/util.c:show_msg(496) size=35 smb_com=0x4 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=136 smb_flg2=51201 smb_tid=1 smb_pid=65279 smb_uid=100 smb_mid=2304 smt_wct=0 smb_bcc=0 [2005/06/21 16:31:08, 3] smbd/process.c:process_smb(1091) Transaction 38 of length 43 [2005/06/21 16:31:08, 5] lib/util.c:show_msg(486) [2005/06/21 16:31:08, 5] lib/util.c:show_msg(496) size=39 smb_com=0x74 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=24 smb_flg2=51207 smb_tid=0 smb_pid=65279 smb_uid=100 smb_mid=2368 smt_wct=2 smb_vwv[ 0]= 255 (0xFF) smb_vwv[ 1]= 0 (0x0) smb_bcc=0 [2005/06/21 16:31:08, 3] smbd/process.c:switch_message(886) switch message SMBulogoffX (pid 9027) conn 0x0 [2005/06/21 16:31:08, 3] smbd/sec_ctx.c:set_sec_ctx(288) setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0 [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_nt_user_token(485) NT user token: (NULL) [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_unix_user_token(506) UNIX token of user 0 Primary group is 0 and contains 0 supplementary groups [2005/06/21 16:31:08, 5] smbd/uid.c:change_to_root_user(296) change_to_root_user: now uid=(0,0) gid=(0,0) [2005/06/21 16:31:08, 5] auth/auth_util.c:free_server_info(1406) attempting to free (and zero) a server_info structure [2005/06/21 16:31:08, 3] smbd/reply.c:reply_ulogoffX(1264) ulogoffX vuid=100 [2005/06/21 16:31:08, 5] lib/util.c:show_msg(486) [2005/06/21 16:31:08, 5] lib/util.c:show_msg(496) size=39 smb_com=0x74 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=136 smb_flg2=51201 smb_tid=0 smb_pid=65279 smb_uid=100 smb_mid=2368 smt_wct=2 smb_vwv[ 0]= 255 (0xFF) smb_vwv[ 1]= 0 (0x0) smb_bcc=0 [2005/06/21 16:31:08, 3] smbd/process.c:process_smb(1091) Transaction 39 of length 39 [2005/06/21 16:31:08, 5] lib/util.c:show_msg(486) [2005/06/21 16:31:08, 5] lib/util.c:show_msg(496) size=35 smb_com=0x71 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=24 smb_flg2=51207 smb_tid=1 smb_pid=65279 smb_uid=100 smb_mid=2432 smt_wct=0 smb_bcc=0 [2005/06/21 16:31:08, 3] smbd/process.c:switch_message(886) switch message SMBtdis (pid 9027) conn 0x929eb58 [2005/06/21 16:31:08, 3] smbd/sec_ctx.c:set_sec_ctx(288) setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0 [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_nt_user_token(485) NT user token: (NULL) [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_unix_user_token(506) UNIX token of user 0 Primary group is 0 and contains 0 supplementary groups [2005/06/21 16:31:08, 5] smbd/uid.c:change_to_root_user(296) change_to_root_user: now uid=(0,0) gid=(0,0) [2005/06/21 16:31:08, 3] smbd/sec_ctx.c:set_sec_ctx(288) setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0 [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_nt_user_token(485) NT user token: (NULL) [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_unix_user_token(506) UNIX token of user 0 Primary group is 0 and contains 0 supplementary groups [2005/06/21 16:31:08, 5] smbd/uid.c:change_to_root_user(296) change_to_root_user: now uid=(0,0) gid=(0,0) [2005/06/21 16:31:08, 3] smbd/service.c:close_cnum(830) sancho (10.0.0.150) closed connection to service IPC$ [2005/06/21 16:31:08, 3] smbd/connection.c:yield_connection(69) Yielding connection to IPC$ [2005/06/21 16:31:08, 4] smbd/vfs.c:vfs_ChDir(660) vfs_ChDir to / [2005/06/21 16:31:08, 3] smbd/sec_ctx.c:set_sec_ctx(288) setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0 [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_nt_user_token(485) NT user token: (NULL) [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_unix_user_token(506) UNIX token of user 0 Primary group is 0 and contains 0 supplementary groups [2005/06/21 16:31:08, 5] smbd/uid.c:change_to_root_user(296) change_to_root_user: now uid=(0,0) gid=(0,0) [2005/06/21 16:31:08, 5] lib/util.c:show_msg(486) [2005/06/21 16:31:08, 5] lib/util.c:show_msg(496) size=35 smb_com=0x71 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=136 smb_flg2=51201 smb_tid=1 smb_pid=65279 smb_uid=100 smb_mid=2432 smt_wct=0 smb_bcc=0 [2005/06/21 16:31:08, 3] smbd/process.c:timeout_processing(1334) timeout_processing: End of file from client (client has disconnected). [2005/06/21 16:31:08, 5] lib/gencache.c:gencache_shutdown(88) Closing cache file [2005/06/21 16:31:08, 5] libsmb/namecache.c:namecache_shutdown(79) namecache_shutdown: netbios namecache closed successfully. [2005/06/21 16:31:08, 3] smbd/sec_ctx.c:set_sec_ctx(288) setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0 [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_nt_user_token(485) NT user token: (NULL) [2005/06/21 16:31:08, 5] auth/auth_util.c:debug_unix_user_token(506) UNIX token of user 0 Primary group is 0 and contains 0 supplementary groups [2005/06/21 16:31:08, 5] smbd/uid.c:change_to_root_user(296) change_to_root_user: now uid=(0,0) gid=(0,0) [2005/06/21 16:31:08, 2] smbd/server.c:exit_server(609) Closing connections [2005/06/21 16:31:08, 3] smbd/connection.c:yield_connection(69) Yielding connection to [2005/06/21 16:31:08, 5] smbd/oplock.c:receive_local_message(107) receive_local_message: doing select with timeout of 1 ms [2005/06/21 16:31:08, 3] smbd/server.c:exit_server(652) Server exit (normal exit) ========================================== ============NMBD LOG================= [2005/06/21 19:38:46, 0] smbd/server.c:main(798) smbd version 3.0.14a-2 started. Copyright Andrew Tridgell and the Samba Team 1992-2004 [2005/06/21 19:38:46, 1] param/loadparm.c:lp_do_parameter(3159) WARNING: The "min passwd length" option is deprecated [2005/06/21 19:38:46, 5] lib/debug.c:debug_dump_status(366) INFO: Current debug levels: all: True/5 tdb: False/0 printdrivers: False/0 lanman: False/0 smb: False/0 rpc_parse: False/0 rpc_srv: False/0 rpc_cli: False/0 passdb: False/0 sam: False/0 auth: False/0 winbind: False/0 vfs: False/0 idmap: False/0 quota: False/0 acls: False/0 doing parameter log file = /var/log/samba/log.%m doing parameter load printers = yes doing parameter guest account = nobody doing parameter ldap user suffix = ou=Users doing parameter add group script = /usr/local/sbin/smbldap-groupadd -p "%g" doing parameter socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 doing parameter add user to group script = /usr/local/sbin/smbldap-groupmod -m "%u" "%g" doing parameter mangling method = hash2 doing parameter logon drive = H: doing parameter deadtime = 10 doing parameter create mask = 0640 doing parameter domain master = yes doing parameter username map = /etc/samba/smbusers doing parameter interfaces = 10.0.0.75 doing parameter map to guest = Bad User doing parameter encrypt passwords = yes doing parameter passdb backend = ldapsam:ldap://127.0.0.1/ doing parameter logon home = doing parameter printer admin = @"Print Operators" doing parameter case sensitive = no doing parameter wins support = yes doing parameter ldap delete dn = Yes doing parameter ldap machine suffix = ou=Computers doing parameter ldap group suffix = ou=Groups doing parameter server string = Samba Server %v doing parameter ldap suffix = dc=mtgmilw,dc=biz doing parameter logon path = doing parameter add user script = /usr/local/sbin/smbldap-useradd -m "%u" doing parameter directory mask = 0750 doing parameter set primary group script = /usr/local/sbin/smbldap-usermod -g "%g" "%u" doing parameter syslog = 0 doing parameter ldap idmap suffix = ou=Users doing parameter preferred master = Yes doing parameter unix charset = ISO8859-1 [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE doing parameter domain logons = Yes doing parameter ldap ssl = no [2005/06/21 19:38:46, 2] param/loadparm.c:do_section(3435) Processing section "[homes]" doing parameter comment = Home Directories doing parameter browseable = no doing parameter read only = No doing parameter create mask = 0644 doing parameter directory mask = 0775 [2005/06/21 19:38:46, 2] param/loadparm.c:do_section(3435) Processing section "[netlogon]" doing parameter path = /home/netlogon doing parameter browseable = No doing parameter read only = yes [2005/06/21 19:38:46, 2] param/loadparm.c:do_section(3435) Processing section "[Profiles]" doing parameter path = /home/profiles doing parameter browseable = no doing parameter guest ok = yes doing parameter read only = no doing parameter create mask = 0600 doing parameter directory mask = 0700 doing parameter profile acls = yes doing parameter csc policy = disable doing parameter force user = %U doing parameter valid users = %U @"Domain Admins" [2005/06/21 19:38:46, 2] param/loadparm.c:do_section(3435) Processing section "[printers]" doing parameter comment = Network Printers doing parameter printer admin = @"Print Operators" doing parameter path = /home/spool/ doing parameter browseable = no doing parameter guest ok = yes doing parameter writable = no doing parameter printable = yes doing parameter read only = yes doing parameter print command = /usr/bin/lpr -P%p -r %s doing parameter lpq command = /usr/bin/lpq -P%p doing parameter lprm command = /usr/bin/lprm -P%p %j [2005/06/21 19:38:46, 2] param/loadparm.c:do_section(3435) Processing section "[print$]" doing parameter path = /home/printers doing parameter guest ok = No doing parameter browseable = yes doing parameter read only = yes doing parameter valid users = @"Print Operators" doing parameter write list = @"Print Operators" doing parameter create mask = 0664 doing parameter directory mask = 0775 [2005/06/21 19:38:46, 2] param/loadparm.c:do_section(3435) Processing section "[public]" doing parameter comment = Public Stuff doing parameter path = /home/public doing parameter browseable = yes doing parameter guest ok = yes doing parameter directory mask = 0775 doing parameter create mask = 0664 doing parameter read only = no [2005/06/21 19:38:46, 4] param/loadparm.c:lp_load(3947) pm_process() returned Yes [2005/06/21 19:38:46, 3] param/loadparm.c:lp_add_ipc(2404) adding IPC service [2005/06/21 19:38:46, 3] param/loadparm.c:lp_add_ipc(2404) adding IPC service [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:38:46, 3] printing/pcap.c:pcap_cache_reload(114) reloading printcap cache [2005/06/21 19:38:46, 5] printing/print_cups.c:cups_cache_reload(71) reloading cups printcap cache [2005/06/21 19:38:46, 3] printing/pcap.c:pcap_cache_reload(213) reload status: ok [2005/06/21 19:38:46, 3] printing/pcap.c:pcap_cache_reload(114) reloading printcap cache [2005/06/21 19:38:46, 5] printing/print_cups.c:cups_cache_reload(71) reloading cups printcap cache [2005/06/21 19:38:46, 3] printing/pcap.c:pcap_cache_reload(213) reload status: ok [2005/06/21 19:43:15, 0] smbd/server.c:main(798) smbd version 3.0.14a-2 started. Copyright Andrew Tridgell and the Samba Team 1992-2004 [2005/06/21 19:43:15, 1] param/loadparm.c:lp_do_parameter(3159) WARNING: The "min passwd length" option is deprecated [2005/06/21 19:43:15, 5] lib/debug.c:debug_dump_status(366) INFO: Current debug levels: all: True/5 tdb: False/0 printdrivers: False/0 lanman: False/0 smb: False/0 rpc_parse: False/0 rpc_srv: False/0 rpc_cli: False/0 passdb: False/0 sam: False/0 auth: False/0 winbind: False/0 vfs: False/0 idmap: False/0 quota: False/0 acls: False/0 doing parameter log file = /var/log/samba/log.%m doing parameter load printers = yes doing parameter guest account = nobody doing parameter ldap user suffix = ou=Users doing parameter add group script = /usr/local/sbin/smbldap-groupadd -p "%g" doing parameter socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 doing parameter add user to group script = /usr/local/sbin/smbldap-groupmod -m "%u" "%g" doing parameter mangling method = hash2 doing parameter logon drive = H: doing parameter deadtime = 10 doing parameter create mask = 0640 doing parameter domain master = yes doing parameter username map = /etc/samba/smbusers doing parameter interfaces = 10.0.0.75 doing parameter map to guest = Bad User doing parameter encrypt passwords = yes doing parameter passdb backend = ldapsam:ldap://127.0.0.1/ doing parameter logon home = doing parameter printer admin = @"Print Operators" doing parameter case sensitive = no doing parameter wins support = yes doing parameter ldap delete dn = Yes doing parameter ldap machine suffix = ou=Computers doing parameter ldap group suffix = ou=Groups doing parameter server string = Samba Server %v doing parameter ldap suffix = dc=mtgmilw,dc=biz doing parameter logon path = doing parameter add user script = /usr/local/sbin/smbldap-useradd -m "%u" doing parameter directory mask = 0750 doing parameter set primary group script = /usr/local/sbin/smbldap-usermod -g "%g" "%u" doing parameter syslog = 0 doing parameter ldap idmap suffix = ou=Users doing parameter preferred master = Yes doing parameter unix charset = ISO8859-1 [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE doing parameter domain logons = Yes doing parameter ldap ssl = no [2005/06/21 19:43:15, 2] param/loadparm.c:do_section(3435) Processing section "[homes]" doing parameter comment = Home Directories doing parameter browseable = no doing parameter read only = No doing parameter create mask = 0644 doing parameter directory mask = 0775 [2005/06/21 19:43:15, 2] param/loadparm.c:do_section(3435) Processing section "[netlogon]" doing parameter path = /home/netlogon doing parameter browseable = No doing parameter read only = yes [2005/06/21 19:43:15, 2] param/loadparm.c:do_section(3435) Processing section "[Profiles]" doing parameter path = /home/profiles doing parameter browseable = no doing parameter guest ok = yes doing parameter read only = no doing parameter create mask = 0600 doing parameter directory mask = 0700 doing parameter profile acls = yes doing parameter csc policy = disable doing parameter force user = %U doing parameter valid users = %U @"Domain Admins" [2005/06/21 19:43:15, 2] param/loadparm.c:do_section(3435) Processing section "[printers]" doing parameter comment = Network Printers doing parameter printer admin = @"Print Operators" doing parameter path = /home/spool/ doing parameter browseable = no doing parameter guest ok = yes doing parameter writable = no doing parameter printable = yes doing parameter read only = yes doing parameter print command = /usr/bin/lpr -P%p -r %s doing parameter lpq command = /usr/bin/lpq -P%p doing parameter lprm command = /usr/bin/lprm -P%p %j [2005/06/21 19:43:15, 2] param/loadparm.c:do_section(3435) Processing section "[print$]" doing parameter path = /home/printers doing parameter guest ok = No doing parameter browseable = yes doing parameter read only = yes doing parameter valid users = @"Print Operators" doing parameter write list = @"Print Operators" doing parameter create mask = 0664 doing parameter directory mask = 0775 [2005/06/21 19:43:15, 2] param/loadparm.c:do_section(3435) Processing section "[public]" doing parameter comment = Public Stuff doing parameter path = /home/public doing parameter browseable = yes doing parameter guest ok = yes doing parameter directory mask = 0775 doing parameter create mask = 0664 doing parameter read only = no [2005/06/21 19:43:15, 4] param/loadparm.c:lp_load(3947) pm_process() returned Yes [2005/06/21 19:43:15, 3] param/loadparm.c:lp_add_ipc(2404) adding IPC service [2005/06/21 19:43:15, 3] param/loadparm.c:lp_add_ipc(2404) adding IPC service [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 5] lib/charcnv.c:charset_name(81) Substituting charset 'UTF-8' for LOCALE [2005/06/21 19:43:15, 3] printing/pcap.c:pcap_cache_reload(114) reloading printcap cache [2005/06/21 19:43:15, 5] printing/print_cups.c:cups_cache_reload(71) reloading cups printcap cache [2005/06/21 19:43:15, 3] printing/pcap.c:pcap_cache_reload(213) reload status: ok [2005/06/21 19:43:15, 3] printing/pcap.c:pcap_cache_reload(114) reloading printcap cache [2005/06/21 19:43:15, 5] printing/print_cups.c:cups_cache_reload(71) reloading cups printcap cache [2005/06/21 19:43:15, 3] printing/pcap.c:pcap_cache_reload(213) reload status: ok ======================================= ============messages=================== Jun 21 19:32:05 localhost gpm[1855]: *** info [startup.c(95)]: Jun 21 19:32:05 localhost gpm[1855]: Started gpm successfully. Entered daemon mode. Jun 21 19:32:05 localhost gpm[1855]: *** info [mice.c(1766)]: Jun 21 19:32:05 localhost gpm[1855]: imps2: Auto-detected intellimouse PS/2 Jun 21 19:32:09 localhost fstab-sync[1932]: removed all generated mount points Jun 21 19:32:09 localhost fstab-sync[1941]: added mount point /media/floppy for /dev/fd0 Jun 21 19:32:10 localhost fstab-sync[1944]: added mount point /media/cdrom for /dev/hdc Jun 21 19:32:21 localhost kernel: mtrr: your processor doesn't support write-combining Jun 21 19:33:55 localhost PAM-securetty[2234]: access denied: tty 'pts/1' is not secure ! Jun 21 19:34:00 localhost login[2234]: FAILED LOGIN 1 FROM 10.0.0.2 FOR root, Authentication failure Jun 21 19:34:09 localhost login[2234]: pam_ldap: ldap_simple_bind Can't contact LDAP server Jun 21 19:34:09 localhost login[2234]: Authentication service cannot retrieve authentication info. Jun 21 19:34:58 localhost gdm[2179]: pam_ldap: ldap_simple_bind Can't contact LDAP server Jun 21 19:34:58 localhost gdm[2179]: Couldn't set acct. mgmt for admin Jun 21 19:35:05 localhost gdm(pam_unix)[2179]: session opened for user root by (uid=0) Jun 21 19:35:08 localhost gconfd (root-2304): starting (version 2.10.0), pid 2304 user 'root' Jun 21 19:35:08 localhost gconfd (root-2304): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jun 21 19:35:08 localhost gconfd (root-2304): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jun 21 19:35:08 localhost gconfd (root-2304): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 21 19:35:16 localhost gconfd (root-2304): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0 Jun 21 19:38:29 localhost named[2448]: starting BIND 9.3.1 -u named -t /chroot/named -c /etc/named.conf -d 2 Jun 21 19:38:29 localhost named[2448]: found 1 CPU, using 1 worker thread Jun 21 19:38:29 localhost named[2448]: loading configuration from '/etc/named.conf' Jun 21 19:38:29 localhost named[2448]: listening on IPv4 interface lo, 127.0.0.1#53 Jun 21 19:38:29 localhost named[2448]: listening on IPv4 interface eth0, 10.0.0.75#53 Jun 21 19:38:29 localhost named[2448]: command channel listening on 127.0.0.1#953 Jun 21 19:38:29 localhost named[2448]: zone 0.0.10.in-addr.arpa/IN: loaded serial 200506192 Jun 21 19:38:29 localhost named[2448]: zone 0.0.127.in-addr.arpa/IN: loaded serial 1 Jun 21 19:38:29 localhost named[2448]: zone mtgmilw.biz/IN: loaded serial 200506191 Jun 21 19:38:29 localhost named[2448]: zone mtgmilw-nt.biz/IN: loaded serial 200506201 Jun 21 19:38:29 localhost named[2448]: running Jun 21 19:39:28 localhost remote(pam_unix)[2499]: session opened for user admin by (uid=0) Jun 21 19:39:28 localhost -- admin[2499]: LOGIN ON pts/2 BY admin FROM ns.mtgmilw.biz Jun 21 19:40:03 localhost su(pam_unix)[2529]: session opened for user root by (uid=500) Jun 21 19:45:13 localhost su(pam_unix)[2529]: session closed for user root Jun 21 19:45:15 localhost remote(pam_unix)[2499]: session closed for user admin Jun 21 20:01:02 localhost crond(pam_unix)[2816]: session opened for user root by (uid=0) Jun 21 20:01:02 localhost crond(pam_unix)[2816]: session closed for user root Jun 21 20:12:32 localhost remote(pam_unix)[2912]: session opened for user root by (uid=0) Jun 21 20:12:32 localhost -- root[2912]: ROOT LOGIN ON pts/2 FROM ns.mtgmilw.biz ============================================== -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
