ashley maher wrote:
I have a samba 3 install with 14 new xp pro clients.
13 of these I was able to join to the domain without any problems. (ie
create machine accounts)
The 14th required a warranty repair and I went to put it onto the domain
recently (several weeks intervening).
This machine claims there is no such domain when I try to join the
domain.
If I use on the rouge machine:
\\servername\sharename
I am prompted for a username-pwd combination and shows the share with no
problems.
If I use tcpdump during the above test it gives good output.
However if I use tcpdump during a join the domian attempt no traffic is
generated (on port 139 or 445)
Clearly I'm missing something silly somewhere that is "obviouse" and I
can't see so any ideas greatfully received.
The 13 other XP Pro machines are happy.
Regards,
Ashley
PS I even disabled the XP sign or seal just in case, which I've not
needed to do for a while.
Whenever I've recieved back machines from off-site repair,
I normally go over the tcp/ip and firewall/anti-virus settings
with a fine tooth comb because frequently those settings were
modified by the repair facility to fit their needs.
It's not normally a problem, but a review of local/effective
security settings doesn't hurt either.
What you're seeing just strikes me that way.
Regards, Doug
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
