Thanks to all who responded. I wound up installing a Netgear GA311
10/100MB NIC. It went in smoothly and functions well.
Eric Hines
At 12/20/05 10:09, Joe Cipale wrote:
To add my $0.02: Anything from Netgear or Intel will be your best choice.
I have found US Robotics support to be spotty at best in nearly
every linux flavor (SuSE, Mandrake, RH9/FC2) I have tried.
Plus I( have a vested interest: I was a QA Engineer on many of the
Intel NICs from the mid-90s to 200, so I have a pretty good idea of
how well they operate.
Joe
Louis van Belle wrote:
> Hi, i use
> 100 mbit, 3com, intel pro100
> Giga bit, intel pro1000
> because both are good supported in kernel
>
> Louis
>
> -----Original Message-----
> >From: "Eric Hines"<[EMAIL PROTECTED]>
> >Sent: 19-12-05 17:47:04
> >To: "samba@lists.samba.org"<samba@lists.samba.org>
> >Subject: [Samba] OT: NIC
> >
> >Folks,
> >
> >I'm trying to add a network interface card to my SUSE 9.3 box, and
> >I'm not having much luck with a US Robotics version. What
> >manufacturer do any of you use in your machines--either
10/100MB or GigE NIC?
> >
> >Thanks
> >
> >Eric Hines
> >
> >There is no nonsense so errant that it cannot be made the creed of
> >the vast majority by adequate governmental action.
> > --Bertrand Russell
There is no nonsense so errant that it cannot be made the creed of
the vast majority by adequate governmental action.
--Bertrand Russell
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
