This problem has been driving me crazy for a week.
Fedora Core 4, Cups 1.2.1 Samba 3.0.23a Thanks in advance.
--
Curtis Maurand
Senior Network & Systems Engineer
BlueTarp Financial, Inc.
443 Congress St. 6th Floor
Portland, ME 04101
207.797.5900 x233 (office)
207.797.3833 (fax)
mailto:[EMAIL PROTECTED]
http://www.bluetarp.com
-- To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
If you used cupsaddsmb to export your printer, CUPS 1.2.1 had a bug,
that caused problems with Samba. (See below)
1.2.2 had a different bug with advanced features. Try 1.2.3 or 1.2.4.
Dale
-------- Original Message --------
Subject: [Samba] Re: Samba print problem (everything looks right)
Date: Fri, 09 Jun 2006 09:34:55 -0400
From: Brian White <[EMAIL PROTECTED]>
Organization: Precidia Technologies http://www.precidia.com/
To: Alessandro Morgantini <[EMAIL PROTECTED]>
CC: [email protected]
References: <[EMAIL PROTECTED]>
I read your posts on samba mailing list.
I have the same problem:
I can print, but I can't open the printer properties page ("no driver"
message...).
For me also, the drivers are read from samba server e written on
C:\WinNT\System32\spool\drivers\... (I have removed him in advance to
test this).
There was a bug in the cupssmbadd program that stripped all end-of-line
characters during the conversion. (Many thanks to Vincent Nicolas for
catching this!) See http://www.cups.org/str.php?L1750
Brian
( [EMAIL PROTECTED] )
-------------------------------------------------------------------------------
BREAKFAST.COM Halted... Cereal Port Not Responding
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
