Hi list members, I've a problem with a printer in a samba network like the following
client ----> samba dc ----> cups ----> network plotter Client: Windows XP Professional Samba: 3.0.20b on SLES 9, SP3 Cups: 1.1.20 Printer: HP DesignJet 1050C The plotter is installed as a windows network printer on the samba server. Cups is directly connected to samba: printing = cups printcap name = cups cups options = raw No I send a print job from the windows client to the plotter and try to change the priority of the print job. The graphical interface of the printer driver shows a slider to set the priority of the current job from 1 to 100. But if I clicked 'Apply', the program shows a message, that it is not possible to change the job. I enabled the debug logging at the cups daemon. There's no message shown about this. It seems to be a problem between the client and the samba - cups connections. I've recorded the communication between client and samba server with tcpdump and disassembled the traffic with wireshark (ethereal). I see many many smb rpc messages interchanged. I could not find any message to change the priority of the print job. Could anbody tell me, how I can debug this? Is it possible to increment the samba logging only for printer communication? Whats the name of the smb rpc call to change the job priorty. Is the syntax documented somewhere? Best regards, Martin Werthmoeller -- LWsystems - IT-Service and Consulting [EMAIL PROTECTED] * http://www.lw-systems.de -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
