You can ignore this post. I finally realized that I still had SELINUX enabled.
Scott Vintinner wrote:
I'm trying to install print drivers onto my samba 3.0.28 server (Fedora
Core 8) following the Add Printer Wizard Driver Installation directions
here:
http://us3.samba.org/samba/docs/man/Samba-HOWTO-Collection/classicalprinting.html#id388379
Unfortunately, when I try to add the print driver, I receive a Windows
"Add Printer Driver Wizard : Unable to install Ghostscript PDF, Windows
2000 or XP, Intel driver. Access is Denied" error message. Trying to
add a printer using the Add Printer wizard results in a similar "Add
Printer Wizard : Printer driver was not installed. Access is denied."
The Samba server is a stand-alone server. I'm connecting to the Samba
server from an XP machine, using the net use \\acro1\print$ /user:root
command to make sure that I'm connected as root. I've also run
smbstatus to ensure that I'm connected as root:
[EMAIL PROTECTED] samba]# smbstatus
Samba version 3.0.28-0.fc8
PID Username Group Machine
-------------------------------------------------------------------
2234 root root xp-vinsco (10.1.1.147)
Service pid machine Connected at
-------------------------------------------------------
print$ 2234 xp-vinsco Thu Jan 3 16:09:40 2008
IPC$ 2234 xp-vinsco Thu Jan 3 16:16:27 2008
Locked files:
Pid Uid DenyMode Access R/W Oplock
SharePath Name Time
--------------------------------------------------------------------------------------------------
2234 0 DENY_NONE 0x100001 RDONLY NONE
/etc/samba/drivers . Thu Jan 3 16:10:00 2008
The server is not running SELINUX, and the samba install seems to work
fine otherwise (meaning I can connect to a test share as root and edit
files just fine). Below is my smb.conf. Note that this server is being
setup to use Acrophobia (http://acrophobia.sourceforge.net), which is
where the ePDF.py scripts are from. I've contacted the author, but
Acrophobia is currently only supported on Fedora Core 3. It's also my
inexperienced feeling that my problem is a SAMBA problem rather than a
problem with one of his scripts.
Any help or other ideas for debugging this would be greatly appreciated.
Scott
#Global Settings =====================================
[global]
addprinter command = /usr/bin/ePDF.py --addprinter
map to guest = Bad User
guest account = pcguest
show add printer wizard = Yes
workgroup = rbh
server string = Linux ePDF Server
log file = /var/log/samba/log.%m
max log size = 50
security = user
passdb backend = smbpasswd
local master = no
wins server = 10.1.19.84
load printers = yes
cups options = raw
printing = lprng
#Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
guest ok = no
writable = no
printable = yes
[print$]
comment = Print Drivers
path = /etc/samba/drivers
guest ok = yes
write list = root
[test]
path = /etc/samba
guest ok = no
writable = yes
write list = root
[basepdf]
comment =
queueresume command = /usr/bin/ePDF.py --endbatch --user %U
printable = yes
print command = /usr/bin/ePDF.py --jobname '%J' --user %U %s
guest ok = yes
path = /var/spool/ePDF/basepdf
printer name = Acrophobia PDF Printer
queuepause command = /usr/bin/ePDF.py --startbatch --user %U
lpq command = /usr/bin/ePDF.py --qstat --workdir '[%S]' --user %U
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
